1、FORD WORLDWIDE FASTENER STANDARDDate: 1993-01-01Engineering Standards & 1 of 2 Printed copies are uncontrolled .Systems Engineering (ESSE)WM 960Dimensions, Material and Performance of a Plastic Multi-Purpose Connection Feature1. SCOPE.This standard covers the dimensions, material and performance req
2、uirements of a plastic multi-purposeconnection feature that allows various specially designed fasteners to be attached to each other or thevehicle with pre-determined assembly forces.NOTE: This standard does not cover the design of the fasteners that can be attached to the multi-purposeconnection fe
3、ature or the method by which the feature is attached to the vehicle.1.1 REFERENCES.WSK-M4D635-A2/A3 - Acetal (POM) copolymer.2. DIMENSIONS.The dimensions of the multi-purpose connection feature shall be as specified in Figure 1.Figure 1.FORD WORLDWIDE FASTENER STANDARDDate: 1993-01-01Engineering Sta
4、ndards & 2 of 2 Printed copies are uncontrolled .Systems Engineering (ESSE)WM 960Dimensions, Material and Performance of a Plastic Multi-Purpose Connection FeatureFigure 1. (Continued)3. MATERIAL.The material for the multi-purpose connection feature shall be in accordance with WSK-M4D635-A2/A3.4. PERFORMANCE.The load to assemble the two parts of the feature to each other shall not exceed 45 N. The load todisassemble the two parts of the feature from each other shall not be less than 150 N.
