1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 0 2014 06 11 Released M. Dumitrescu, NA Controlled document at www.MATS Copyright 2014, Ford Global Technologies, LLC Page 1 of 2 FABRIC, ALLURE PATTERN, CIRCULAR KNIT, WRS-M1H1167-A1 42% PIR/PCR UNLAMINATED 1. SCOPE The material defined
2、 is circular knit polyester face fabric. Material conforming to WRS-M1H1167-A1 contains 42% PIR/PCR (Post industrial/post-consumer) recycled yarn. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2015MY Edge seat insert. The fabric was origin
3、ally approved as laminated with foam and backing scrim. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). Materials with recycled content as defined by
4、 WRS-M99P42-A2 (Textile Materials, Identification of Recycled Content) should be used whenever technically feasible. 3.1.1 This specification must contain 42% recycled content as defined by WRS-M99P42-A2.The remaining portion of the material can come from virgin sources. 3.1.2 In addition to the req
5、uirements listed herein, the fabric shall meet all requirements of WSS-M8P18-B1/B2/B3/B4 as applicable. 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, -10 /+10 % tolerance (ASTM D3775) Wales 114 / 10 cm Courses 98 / 10 cm 3.2.2 Fabric Weight, - 10 / +10 % tolerance 400 g/m2 (FLTM BN 106-01) 3.3 COMPOSI
6、TION (ASTM D629) Fabric 100% polyester ENGINEERING MATERIAL SPECIFICATION WRS-M1H1167-A1 Copyright 2014, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D1244) Face (A) 167 dtex f36 (polyester text yarn) x 3 Back 111 dtex f36 (100% recycled polyester yarn) x 2 3.5 METHOD OF DYE
7、ING Solution/Piece dyed or as approved by Materials Engineering 3.6 FINISHED OPERATIONS Dye, tenter pad (resin), heatset, or as approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specif
8、ication. Contact for questions concerning Engineering Material Specifications. 4.1 Purchase departments will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only. 4.2 Global strategy to use tri-Laminate construction in all regions. 4.3 If yarn is locally sourced it must meet the above fabric construction, composition and yarn construction. The fabric must also meet the requirements of WSS-M8P18-B1/B2/B3/B4.
