1、ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 00 2014 10 09 Released M. Dumitrescu, NA Controlled document at www.MATS Copyright 2014, Ford Global Technologies, Inc. Page 1 of 2 FABRIC, MANHATTAN II PATTERN, FLAT WOVEN WRS-M1H1169-B1 40% PIR/PCR UNLAMINATED FABRIC, MANHATTAN II PATTER
2、N, FLAT WOVEN WRS-M1H1169-B2 100% PIR/PCR UNLAMINATED 1. SCOPE The material defined by this specification is a woven Jacquard face fabric. The fabric is made with 40% PIR/PCR (Post industrial/post-consumer) recycled yarn. 2. APPLICATION WRS-M1H1169-B1 specification was released originally for materi
3、al used as an interior trim fabric for S-Max EU as seat insert. The fabric was approved as backcoated and trilaminated. WRS-M1H1169-B2 specification was release originally for material used as an interior trim fabric for CD391 NA as seat insert. The fabric was approved as backcoated and laminated wi
4、th foam. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). Materials with recycled content as defined by WRS-M99P42-A2 (Textile Materials, Identificati
5、on of Recycled Content) should be used whenever technically feasible. 3.1.1 This specification must contain 40% recycled content as defined by WRS-M99P42-A2. The remaining portion of the material can come from virgin sources. 3.1.2 This specification must contain 100% recycled content as defined by
6、WRS-M99P42-A2. 3.1.3 In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-B1/B2/B3/B4 as applicable. 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Warp 880 ends/10 cm Weft 295 picks/10 cm 3.2.2 Fabric Weight, +/-10 % toleran
7、ce, (FLTM BN 106-01) Face fabric 310 g/m2Backcoat 50 g/m2Total weight 360 g/m2ENGINEERING MATERIAL SPECIFICATION WRS-M1H1169-B1/B2 Copyright 2014, Ford Global Technologies, Inc. Page 2 of 2 3.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-B1/B4 Fabric 100% Polyester Backcoating Acryl
8、ic Backing scrim Circular knit polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) WRS-M1H1169-B1 WRS-M1H1169-B2 Warp 167dtex (semi-dull polyester yarn) x 1 167 dtex (100% recycled semi-dull polyester yarn) x 1 Weft 167 dtex (100% recycled 167 dtex (100% recycled semi-dull polyester yarn) x 2 semi-dull po
9、lyester yarn) x 2 3.5 METHOD OF DYEING Piece dye/Solution dye 3.6 FINISHING OPERATIONS wash, dye, dry, tenter, backcoated, Or as approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this speci
10、fication. Contact for questions concerning Engineering Material Specifications. 4.1 Purchase departments will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only. 4,2 The global strategy is to use Tri-Laminate construction in all regions. 4.3 If yarn is locally sourced it must meet the above fabric construction, composition and Yarn construction. The fabric must also meet the requirements of WSS-M8P18-B1/B2/B3/B4.
