1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 0 2015 04 09 Released D. Murtonen, FNA Controlled document at www.MATS Copyright 2015, Ford Global Technologies, LLC Page 1 of 2 FABRIC, VIEW HD PATTERN, WARP KNIT, WRS-M1H1195-A20 25% RECYCLED PIR/PCR CONTENT 1. SCOPE The material defin
2、ed is a warp knit polyester face fabric. Material conforming to WRS-M1H1195-A20 contains 25% minimum PIR/PCR (post industrial/postconsumer) recycled yarn. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for CD 391 2016 MY seat bolster. The fabri
3、c was originally approved as trilaminated with foam and backing fabric/scrim. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS 3.1.1 Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1.2 This specif
4、ication must contain 25% minimum recycled content as defined by WRS-M99P42-A2. The remaining portion of the material can come from virgin sources. 3.1.3 In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-B1/B2/B3/B4 as applicable. 3.1.4 Materials used
5、in interior applications must meet the requirements outlined in WSS-M99P2222-D1/latest, Performance, Vehicle Interior Environmental Quality Material/Component Requirements. Data must be included in material submission package. 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, (+/-5%) (ASTM D3775) Wales 14
6、5 / 10 cm Courses 193/ 10 cm 3.2.2 Fabric Weight (FLTM BN 106-01) Face Fabric 295 g/m2 (+/-5%) Scrim Backing Fabric 35 g/m2 (+10/-5 g/m) 3.3 COMPOSITION (ASTM D629) Face Fabric 100% polyester Scrim Backing Fabric 100% polyester, circular knitENGINEERING MATERIAL SPECIFICATION WRS-M1H1195-A20 Copyrig
7、ht 2015, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION* (ASTM D1244) Face (A) 78 Dtex f34 solution dye (polyester with recycled yarn) Face (B) 78 Dtex f34, (polyester with recycled yarn) 3.5 METHOD OF DYEING Solution and Piece Dyed per yarn 3.6 FINISHED OPERATIONS Drying, Tenter (A
8、crylic Resin) 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. 4.1 Purchase departments will ensure that the material defined in th
9、is specification and shipped to any one assembly plant will be produced by one supplier only. 4.2 If yarn is locally sourced it must meet the above fabric construction, composition and yarn construction. The fabric must also meet the requirements of WSS-M8P18-B1/B2/B3/B4. 4.3 Global strategy for this fabric is to use tri-laminate/foam & scrim construction in all regions
