FORD WRS-M1H1212-A-2010 FABRIC PISTON PATTERN FLAT WOVEN 30% MINIMUM PIR CONTENT TO BE USED WITH FORD WSS-M99P1111-A 《工业使用后材料比例不低于30%的PISTON图案的平织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

上传人:inwarn120 文档编号:748641 上传时间:2019-01-14 格式:PDF 页数:2 大小:19.46KB
下载 相关 举报
FORD WRS-M1H1212-A-2010 FABRIC PISTON PATTERN FLAT WOVEN 30% MINIMUM PIR CONTENT  TO BE USED WITH FORD WSS-M99P1111-A  《工业使用后材料比例不低于30%的PISTON图案的平织织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第1页
第1页 / 共2页
FORD WRS-M1H1212-A-2010 FABRIC PISTON PATTERN FLAT WOVEN 30% MINIMUM PIR CONTENT  TO BE USED WITH FORD WSS-M99P1111-A  《工业使用后材料比例不低于30%的PISTON图案的平织织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions Rev. 1 2010 12 02 Revised 3.2.2 updated with the range M. Dumitrescu, NA 2010 04 15 Activated M. Dumitrescu, NA Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 1 of 2 FABRIC, PISTON PATTERN, FLAT WOVEN WRS-M1

2、H1212-A 30% MINIMUM PIR CONTENT 1. SCOPE The material defined by this specification is a Piston pattern, Dobby, flat woven bodycloth of good quality and uniform composition. The fabric has min 30% PIR (Post Industrial Recycled yarn) content and it is backcoated. 2. APPLICATION This specification was

3、 released originally for material used as a seat fabric, insert application for 2011 P473 F-250/350/450 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of: WSS-M8P18-A1/A4. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and

4、 part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A) 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 330 ends/10 cm Fill 175 picks/10 cm 3.2.2 Fabric Weight, range (FLTM BN 106-01) Face Fabric 358 - 396 g/m2 Back

5、coat 50 65 g/m2 3.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4. Fabric 88% Polyester 12% Nylon Backcoating Acrylic ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1212-A Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (

6、ASTM D 1244) Warp 16.5 tex f48 (air texture polyester) x 3 Fill 172 tex (flocked yarn, Nylon) x 1 85 tex f192 (air texture 100% PIR polyester) x 1 3.5 METHOD OF DYEING Solution dye/yarn-package dye 3.6 FINISHING OPERATIONS Warping, weaving, backcoated, heat set 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase department will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only.

展开阅读全文
相关资源
猜你喜欢
  • DIN EN 300369-4-2002 Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No one (DSS1) protocol Explicit Call Transfer (ECT) supplementary service - P.pdf DIN EN 300369-4-2002 Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No one (DSS1) protocol Explicit Call Transfer (ECT) supplementary service - P.pdf
  • DIN EN 300369-5-2002 Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No one (DSS1) protocol Explicit Call Transfer (ECT) supplementary service - P.pdf DIN EN 300369-5-2002 Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No one (DSS1) protocol Explicit Call Transfer (ECT) supplementary service - P.pdf
  • DIN EN 300369-6-2002 Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No one (DSS1) protocol Explicit Call Transfer (ECT) supplementary service - P.pdf DIN EN 300369-6-2002 Integrated Services Digital Network (ISDN) - Digital Subscriber Signalling System No one (DSS1) protocol Explicit Call Transfer (ECT) supplementary service - P.pdf
  • DIN EN 300370-2002 Digital Enhanced Cordless Telecommunications (DECT) - Global System for Mobile communications (GSM) DECT GSM interworking profile (IWP) - Access and mapping (Pro.pdf DIN EN 300370-2002 Digital Enhanced Cordless Telecommunications (DECT) - Global System for Mobile communications (GSM) DECT GSM interworking profile (IWP) - Access and mapping (Pro.pdf
  • DIN EN 300371-2001 Telecommunications Management Network (TMN) - Plesiochronous Digital Hierarchy (PDH) information model for the Network Element (NE) view (Endorsement of the Engln.pdf DIN EN 300371-2001 Telecommunications Management Network (TMN) - Plesiochronous Digital Hierarchy (PDH) information model for the Network Element (NE) view (Endorsement of the Engln.pdf
  • DIN EN 300373-1-2014 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Maritime mobile transmitters and receivers for use in the MF and HF bands - Part 1 Technical c.pdf DIN EN 300373-1-2014 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Maritime mobile transmitters and receivers for use in the MF and HF bands - Part 1 Technical c.pdf
  • DIN EN 300373-2-2010 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Maritime mobile transmitters and receivers for use in the MF and HF bands - Part 2 Harmonized .pdf DIN EN 300373-2-2010 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Maritime mobile transmitters and receivers for use in the MF and HF bands - Part 2 Harmonized .pdf
  • DIN EN 300373-3-2010 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Maritime mobile transmitters and receivers for use in the MF and HF bands - Part 3 Harmonized .pdf DIN EN 300373-3-2010 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Maritime mobile transmitters and receivers for use in the MF and HF bands - Part 3 Harmonized .pdf
  • DIN EN 300376-1-2000 Telecommunications Management Network (TMN) - Q3 interface at the Access Network (AN) for configuration management of V5 interfaces and associated user ports -.pdf DIN EN 300376-1-2000 Telecommunications Management Network (TMN) - Q3 interface at the Access Network (AN) for configuration management of V5 interfaces and associated user ports -.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1