1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 0 2011 10 07 Activated M. Dumitrescu, NA Controlled document at www.MATS Copyright 2011, Ford Global Technologies, LLC Page 1 of 2 FABRIC, DIE HARD PATTERN, FLAT WOVEN WRS-M1H1222-A 21% PIR, UNLAMINATED 1. SCOPE The material defined by t
2、his specification is a flat woven fabric. The fabric is made with 21% recycled yarn (Post Industrial yarn). 2. APPLICATION This specification was released originally for material used as a seat fabric, insert application for D258 and U502 2013 Police vehicle. The fabric is back coated. 3. REQUIREMEN
3、TS In addition to the requirements listed herein, the fabric shall meet all requirements of: WSS-M8P18-A1/A4. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A) 3.1.1 Re
4、cycled Content This specification contains 21% recycled content as defined by WRS-M99P42-A2 (Textile Materials, Identification of Recycled Content). The remaining portion of the material can come from virgin sources 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 165
5、ends/10 cm Fill 200 picks/10 cm 3.2.2 Fabric Weight, +/- 10% tolerance (FLTM BN 106-01) Face Fabric 343 g/m2. Back coat 50 g/m2 Total 393 g/m2 ENGINEERING MATERIAL SPECIFICATION WRS-M1H1222-A Copyright 2011, Ford Global Technologies, LLC Page 2 of 2 3.3 COMPOSITION (ASTM D 629) Tolerance as specifie
6、d in WSS-M8P18-A1/A4. Fabric 100 % Polyester Backcoating Acrylic 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 1150 dtex f384 (polyester twisted) 1150 dtex f384 (polyester twisted) Weft 600 dtex f144 (100 % PIR polyester) 800 dtex f120 (high tenacity polyester) 3.5 METHOD OF DYEING Solution dye/package d
7、ye 3.6 FINISHING OPERATIONS Warping, weaving, backcoated, top resin finish, heat set 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. 4.1 Purchase department will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
