1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 00 2013 05 10 Released M. Dumitrescu, NA Copyright 2013, Ford Global Technologies, Inc. Page 1 of 2 FABRIC, LEGEND PATTERN, FLAT WOVEN WRS-M1H1239-A1 25% PIR UNLAMINATED 1. SCOPE The material defined by this specification is a woven dobby
2、 face fabric. The fabric is made with 25% PIR (Post industrial) recycled yarn. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for F-Series 2016 seat insert. The fabric was approved as backcoated. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PR
3、ODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). Materials with recycled content as defined by WRS-M99P42-A2 (Textile Materials, Identification of Recycled Content) should be used whenever technical
4、ly feasible. 3.1.1 This specification must contain 25% recycled content as defined by WRS-M99P42-A2. The remaining portion of the material can come from virgin sources 3.1.2 In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable.
5、3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Warp 260 ends/10 cm Weft 200 picks/10 cm 3.2.2 Fabric Weight, +/-10 % tolerance, (FLTM BN 106-01) Face fabric 350 g/m2 Backcoat/Resin 43 g/m2 Total weight 393 g/m2 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester Backcoati
6、ng Acrylic ENGINEERING MATERIAL SPECIFICATION WRS-M1H1239-A1 Copyright 2013, Ford Global Technologies, Inc. Page 2 of 2 Tolerance as specified in WSS-M8P18-A1/A4 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 1150 dtex (solution dye polyester yarn) 370 dtex (100% recycled solution dye polyester yarn) Weft
7、 370 dtex (100% recycled solution dye polyester yarn) 1150 dtex (solution dye polyester yarn) 3.5 METHOD OF DYEING Solution dye 3.6 FINISHING OPERATIONS wash, dry/heat-set,resin treatment,backcoating Or as approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provid
8、ed for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. 4.1 Purchase departments will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only. 5. SUMMARY OF REVISIONS
