1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2009 01 06 N-STATUS No Replacement B. Haggart, FNA 2003 01 31 Revised Para 3.0 inserted ; Para 3.1, 3.2, 3.10, 3.11, 4 deleted 1994 07 30 Released NB00I10043054351 B. Chen A.J. Stocki B.C. Ferns Printed copi
2、es are uncontrolled Page 1 of 3 Copyright 2009, Ford Global Technologies, Inc. FABRIC, ARROW PATTERN, KNITTED BACKCOATED WSB-M1H608-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is an Arrow pattern knit bodycloth of good quality and uniform composition. 2. APPLI
3、CATION This specification was released originally for material used as an interior trim fabric for the 1996 DN101. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSB-M8P1-H. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material supplier
4、s and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.3 FABRIC CONSTRUCTION 3.3.1 Fabric Count, +/- 5 % tolerance (ASTM D 3887) Wales 11. wales/cm Courses 16.4 courses/cm 3.3.2 Fabric Weight, min 500.0 g/m2(FLTM BN 106-01) ENGINEERING MA
5、TERIAL SPECIFICATION WSB-M1H608-A Page 2 of 3 Copyright 2009, Ford Global Technologies, Inc. 3.4 COMPOSITION (ASTM D 629) Tolerance as specified in WSB-M8P1-H Fabric 81.4 % Polyester 13.2 % Nylon 5.4 % Polypropylene Backoating Acrylic 3.5 YARN CONSTRUCTION (ASTM D 1244) Face (A) 15.0 tex f52 (polypr
6、opylen, solution dyed) Middle (D) 15.6 tex f40 (nylon, bright, round) (E) 16.7 tex f32 (polyester, semi-dull, round) Back (F) 11.1 tex f33 (polyester, semi-dull, round) (G) 11.1 tex f33 (polyester, semi-dull, round) 3.6 METHOD OF DYEING Piece dyed 3.7 FINISHING OPERATIONS Dye, dry, nap, shear, heats
7、et 3.8 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute ENGINEERING MATERIAL SPECIFICATION WSB-M1H608-A Page 3 of 3 Copyright 2009, Ford Global Technologies, Inc. 3.9 STRETCH AND SET, %, range (SAE J855) Fabrics outside this range may be accepted provided they have been approved jointly
8、 by the Materials Engineering activity and the affected Design Engineering and Development activity. Stretch, range Wales Courses 6 - 30 10 - 35 Set, max* Wales Courses 12 14 *At no time shall the set exceed 40 % of the measured stretch unless approved jointly by the Materials Engineering activity and the affected Design Engineering and Development activity.
