1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2010 08 23 Revised See Summary of Revisions C. Richardson, NA 2010 01 06 WSE-M4C111-A N-STATUS No known use. No replacement named D. DiGregorio, NA 1993 06 10 Released NE01E10127076090 M. Riley Printed copies are uncontrolled Copyright 2010, F
2、ord Global Technologies, LLC Page 1 of 3 GASOLINE, UNLEADED, INITIAL FILL, PREMIUM GRADE WSE-M4C110-A GASOLINE, UNLEADED, INITIAL FILL, INTERMEDIATE GRADE WSE-M4C111-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The materials defined by these specifications are well-refined gasolines. 2. APPLICATION Thes
3、e specifications were released originally for gasolines used for initial fill for assembly plants in NA. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. These materials must meet the most recently approved requirements of ASTM D4814 Standard
4、 Specification for Automotive Spark-Ignition Engine Fuel and/or comply with the most recent local, state or regional fuel regulation of plants location, plus the following: 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard
5、Requirements For Production Materials (WSS-M99P1111-A). 3.2 ANTIKNOCK INDEX, (RON + MON)/2 (ASTM D2699 / ASTM D2700) Premium Grade 91.0 min Intermediate Grade 89.0 min 3.6 SULPHUR CONTENT 80 mg/kg, max (ASTM D5453) 3.8 FERROUS CORROSION (ASTM D665, Procedure A at 4 hr.) B+, min 3.9 OXIDATION STABILI
6、TY 900 minutes, min (ASTM D525) 3.11 AROMATIC CONTENT Report (see 3.18) 3.12 INTAKE VALVE DEPOSITS (ASTM D5500) or 100 mg/valve, max (ASTM D6201) 50 mg/valve, max ENGINEERING MATERIAL SPECIFICATIONWSE-M4C110-A WSE-M4C111-APrinted copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC
7、Page 2 of 3 3.15 COLOR May include a dye in accordance with standard practice for purpose of vendor and user identification. 3.16 ADDITIVES Fuels shall contain normal commercial additives at concentrations representative of good commercial practice in the receiving locale (unless otherwise specified
8、). Metallic additives shall not be used. Use of oxygenate additives other than ethanol must be approved by Fuels and Lubricants Engineering. Supplier must identify additive formulation which includes additive type and concentration on specification supplement. 3.17 CERTIFICATION Supplier shall certi
9、fy that the gasoline is a formulation that has been tested and meets Ford Motor Company requirements as stated in these specifications. Technical evidence of these data and manufacturing limits must be summarized as specified on the specification supplement. This certification shall be given by the
10、authorized supplier representative and submitted to Ford Fuels and Lubricants Engineering activity for approval. Ford Fuels and Lubricants Engineering may request additional data from supplier as needed to confirm conformance to specification. 3.18 ETHANOL CONTENT (ASTM D4815) 3.18.2 Aromatic conten
11、t of fuel is 10% volume 0 - 10% volume 3.18.3 Aromatic content of fuel is 10% volume 9 - 10% volume 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of these specifications. 5.1 FLAMMABILITY This material represents a potenti
12、al fire hazard. The Manufacturing Engineering Department shall notify both the Plant Security and the Safety Units of its presence in the Plant to assure that proper fire precautions are provided. The location in which it is used or stored shall be included in the notifications. 5.2 SAMPLING AND SUB
13、MISSION OF SAMPLES (ASTM D 4057/ASTM D 4177) 5.3 Quality Control records must be made available to Fuels and Lubricants Engineering upon request 6. SUMMARY OF REVISIONS 2010 08 23 Separated from WSS-M4C112-A Revised: Title,1, 2, 3, 3.8, 3.9, 3.11, 3.16, 3.18,3.17, 3.00, page 3; Deleted: 3.3, 3.4,3.5
14、3.7, 3.18.1 Added:3.18.2,3.18.3 ENGINEERING MATERIAL SPECIFICATIONWSE-M4C110-A WSE-M4C111-APrinted copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 3 of 3 Supplement Company _ Terminal Location _ Product _ Seasonal Grade _ Inspection Property Blending Limits Research Octan
15、e _ _ Motor Octane _ _ Sulfur, mg/kg _ _ Copper Strip Corrosion _ _ Silver Strip Corrosion _ _ Ferrous Corrosion _ _ Oxidation Stability, minutes _ _ Vapor Pressure, kPa _ _ Vapor/Liquid Ratio, TVL20, C _ _ Distillation Range _ _ 10% Evaporated, C _ _ 50% Evaporated, C _ _ 90% Evaporated, C _ _ End
16、Point, C _ _ Ethanol content, % _ _ Oxygen content, % _ _ Aromatics, % volume _ _ Olefins, % volume _ _ Unwashed Gum, mg/100 mL _ _ Solvent Washed Gum, mg/100 mL _ _ Additives Description Concentration, ppm Detergent _ _ Antioxidant _ _ Corrosion inhibitor _ _ Metal Deactivator _ _ _ _ _ _ _ _ _ _ _ Comments: _ Signature _ Title _ Date _
