1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2009 11 17 N-STATUS No known use. No replacement named D. DiGregorio, NA 2003 12 04 Revised Para 3.0 inserted; paras 3.1, 3.2, 3.3, 3.9 and 4 deleted 1993 03 30 Released NEO1-E-10127076-084 N. Adamowicz Printed copies are uncontrolled Copyrigh
2、t 2009, Ford Global Technologies, Inc. Page 1 of 1 LUBRICANT, DRY FILM, COATING, FREON FREE WSE-M99C122-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a coating which also acts as a lubricant. 2. APPLICATION This specification was released originally as a thro
3、ttle body shaft lubricant. The material also reduces the closed plate leakage around the throttle plate and shaft journal. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 VISCOSITY at 25 C 400 mPa.s (ASTM D 1084, Method B) 3.5 DENSITY, max 910 g/L (ASTM D 1475) 3.6 VOLATILES, max 791 g/L (FLTM BI 102-01) 3.7 NON-VOLATILES, % by weight, min 18.5 - 19.5 (FLTM BI 102-01) 3.8 FLASH POINT, max - 8 C (ASTM D 93)
