1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2012 09 26 N-STATUS All sources are inactive A. Wedepohl, NA 2006 02 16 Revised Inserted 3.0; Deleted 3.1, 3.2, 3.3, 3.10 and 4 1992 05 19 Released NE01E10127076055 Controlled document at www.MATS Copyright 2012, Ford Global Technologies, LLC
2、 Page 1 of 1 WAX, MONTAN, WATER SOLUBLE NOT FOR NEW DESIGN WSE-M9G33-A 1. SCOPE The material defined by this specification is a water soluble wax composed of an ester of montanic acid. 2. APPLICATION This specification was released originally for material applied to hose clamps to prevent binding/pi
3、nching of the hose while clamping. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 COLOR AND APPEARANCE White, like milk 3.5 FLASH POINT, min 250 C (ASTM D 93) 3.6 SPECIFIC GRAVITY, min 1.004 (ISO 3675/ASTM D 1298) 3.7 VISCOSITY at 37.8 C, min 10 n/4 mm cup (Din 53221) 3.8 pH (diluted to use), min 4.0 3.9 DILUTION RATIO 25% wax: 75% H2O
