FORD WSH-M2A128-B-2009 ALUMINUM BRAZING SHEET - HEADER STOCK TO BE USED WITH FORD WSS-M99P1111-A 《铝钎焊板 集流管坯料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

上传人:arrownail386 文档编号:750257 上传时间:2019-01-14 格式:PDF 页数:1 大小:17.52KB
下载 相关 举报
FORD WSH-M2A128-B-2009 ALUMINUM BRAZING SHEET - HEADER STOCK  TO BE USED WITH FORD WSS-M99P1111-A  《铝钎焊板 集流管坯料  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第1页
第1页 / 共1页
亲,该文档总共1页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2009 07 09 N-STATUS No Replacement Named B. Curtiss, NA 2005 01 21 Revised Inserted 3.0, Deleted 3.5, 4 1985 08 07 Released RD885100-64 C. F. Carter, CCD Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 1 of 1

2、 ALUMINUM BRAZING SHEET - HEADER STOCK WSH-M2A128-B NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is an aluminum alloy sheet clad with brazing alloy on one side, and a high temperature corrosion protection clad on the other side. 2. APPLICATION This material was r

3、eleased originally for fabrication of header stock for vacuum brazed aluminum radiators. This specification replaces and supersedes ESH-M2A128-A. When ESH-M2A128-A is shown on other documents, the requirements of this specification apply. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATE

4、RIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 CHEMICAL COMPOSITION (Weight Percent) Braze Coolant Side Core Cladding Cladding Silicon 0.40 max 9.2 - 10.2 0.7 max Si + Fe Iron 0.70 max 0.50 max - Copper 0.

5、30 max 0.10 max 0.10 max Manganese 1.0 - 1.5 0.10 max 0.10 max Magnesium 0.40 - 0.70 1.25 - 1.75 0.10 max Bismuth - 0.15 max - Zinc 0.25 max 0.10 max 0.8 - 1.3 Each other element 0.05 max 0.05 max 0.05 max Total other element 0.15 max 0.15 max 0.15 max Aluminum Remainder Remainder Remainder 3.2 CLAD

6、DING THICKNESS (7.5 +/- 1.5% of total) Nominal Gage (total clad sheet) 1.52 - 1.68 mm Cladding (typical each side) 0.114 - 0.126 mm 3.3 MECHANICAL PROPERTIES (Material as Supplied) (ASTM B 557M) Temper O Gage 1.60 mm Tensile Strength 117 - 165 MPa Yield Strength, min 45 MPa Elongation in 50 mm, min 20% 3.4 GRAIN SIZE (Material as Supplied) 3.5 or finer (ASTM E 112)

展开阅读全文
相关资源
猜你喜欢
  • EN 978-1997 en Underground Tanks of Glass-Reinforced Plastics (GRP) - Determination of Factor Alpha and Factor Beta《玻璃钢制地下槽罐(GRP) 系数α和β的测定》.pdf EN 978-1997 en Underground Tanks of Glass-Reinforced Plastics (GRP) - Determination of Factor Alpha and Factor Beta《玻璃钢制地下槽罐(GRP) 系数α和β的测定》.pdf
  • EN 981-1996 en Safety of machinery - System of auditory and visual danger and information signals (Incorporates Amendment A1 2008)《机械安全 危险信号的视听系统 包含修改件A1-2008》.pdf EN 981-1996 en Safety of machinery - System of auditory and visual danger and information signals (Incorporates Amendment A1 2008)《机械安全 危险信号的视听系统 包含修改件A1-2008》.pdf
  • EN 984-2001 en Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings《铺地织物 针刺铺地织物使用表面单位面积质量的测定》.pdf EN 984-2001 en Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings《铺地织物 针刺铺地织物使用表面单位面积质量的测定》.pdf
  • EN 985-2001 en Textile Floor Coverings - Castor Chair Test《铺地织物 小脚轮轮椅试验》.pdf EN 985-2001 en Textile Floor Coverings - Castor Chair Test《铺地织物 小脚轮轮椅试验》.pdf
  • EN 986-2005 en Textile floor coverings - Tiles - Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane《铺地织物 铺地毡块 由.pdf EN 986-2005 en Textile floor coverings - Tiles - Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane《铺地织物 铺地毡块 由.pdf
  • EN 988-1996 en Zinc and Zinc Alloys - Specifications for Rolled Flat Products for Building《锌和锌合金 建筑用轧制板材规范》.pdf EN 988-1996 en Zinc and Zinc Alloys - Specifications for Rolled Flat Products for Building《锌和锌合金 建筑用轧制板材规范》.pdf
  • EN 989-1995 en Determination of the Bond Behaviour Between Reinforcing Bars and Autoclaved Aerated Concrete by the -Push- Out- Test《钢筋和热压充气混凝土胶合性能的 推拉 试验法测定》.pdf EN 989-1995 en Determination of the Bond Behaviour Between Reinforcing Bars and Autoclaved Aerated Concrete by the -Push- Out- Test《钢筋和热压充气混凝土胶合性能的 推拉 试验法测定》.pdf
  • EN 990-2002 en Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure《热压充气混凝土和.pdf EN 990-2002 en Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure《热压充气混凝土和.pdf
  • EN 991-1995 en Determination of the Dimensions of Prefabricated Reinforced Components Made of Autoclaved Aerated Concrete or Lightweight Aggregate Concrete with Open Structure《热压充气.pdf EN 991-1995 en Determination of the Dimensions of Prefabricated Reinforced Components Made of Autoclaved Aerated Concrete or Lightweight Aggregate Concrete with Open Structure《热压充气.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1