FORD WSH-M2A135-A2-2009 ALUMINUM FIN MATERIAL TO BE USED WITH FORD WSS-M99P1111-A 《铝鳍片材料 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD WSH-M2A135-A1上》.pdf

上传人:registerpick115 文档编号:750259 上传时间:2019-01-14 格式:PDF 页数:1 大小:16.08KB
下载 相关 举报
FORD WSH-M2A135-A2-2009 ALUMINUM FIN MATERIAL  TO BE USED WITH FORD WSS-M99P1111-A  《铝鳍片材料  与标准FORD WSS-M99P1111-A一起使用  列于标准FORD WSH-M2A135-A1上》.pdf_第1页
第1页 / 共1页
亲,该文档总共1页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2009 07 09 N-STATUS No Replacement Named B. Curtiss, NA 2003 09 12 Revised Para 3.0 inserted; para 3.1, 3.5 and 4 deleted 1992 09 14 Released CE00E10109215020 C. C. Gray C. C. Printed copies are uncontrolled Copyright 2009, Ford Global Technol

2、ogies, Inc. Page 1 of 1 ALUMINUM FIN MATERIAL WSH-M2A135-A1 WSH-M2A135-A2 NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by these specifications is an aluminum sheet modified AA 3003 or AA 5005 type. 2. APPLICATION These materials were released originally for fabrication of fins on vacu

3、um brazed aluminum A/C evaporators and radiators. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 CHEMICAL COMPOSITION PERCENTAGE (ASTM E 34) A1

4、A2 Silicon 0.60 max 0.50 max Iron 0.70 max 0.70 max Copper 0.05 - 0.20 0.10 max Magnesium - 0.50 - 0.70 Manganese 1.00 - 1.25 0.30 max Zinc 0.10 max 0.10 max Each Other Element 0.05 max 0.05 max Total Other Elements 0.15 max 0.15 max Aluminum Balance Balance 3.4 MECHANICAL PROPERTIES Materials as Supplied (ASTM B 557M) O-Temper H18-Temper Ultimate Tensile Strength, MPa 96 - 125 206 - 248 Yield Strength, MPa, min 41 180 Elongation, %, min 6.0 1.0 - 4.0 Note: Tempers can be applied to either A1 or A2 composition and will be called out on engineering drawing.

展开阅读全文
相关资源
猜你喜欢
  • EN ISO 1110-1997 en Plastics - Polyamides - Accelerated Conditioning of Test Specimens《塑料 聚酰胺 试样的加速调节处理》.pdf EN ISO 1110-1997 en Plastics - Polyamides - Accelerated Conditioning of Test Specimens《塑料 聚酰胺 试样的加速调节处理》.pdf
  • EN ISO 1119-2011 en Geometrical product specifications (GPS) - Series of conical tapers and taper angles《产品几何量规范(GPS) 锥度和锥度角系列》.pdf EN ISO 1119-2011 en Geometrical product specifications (GPS) - Series of conical tapers and taper angles《产品几何量规范(GPS) 锥度和锥度角系列》.pdf
  • EN ISO 1120-2012 en Conveyor belts - Determination of strength of mechanical fastenings - Static test method《传送带 机械连接件强度测定静态测试方法》.pdf EN ISO 1120-2012 en Conveyor belts - Determination of strength of mechanical fastenings - Static test method《传送带 机械连接件强度测定静态测试方法》.pdf
  • EN ISO 1127-1996 en Stainless Steel Tubes - Dimensions Tolerances and Conventional Masses Per Unit Length《不锈钢管 尺寸 公差和单位长度的公称质量 ISO 1127-1992》.pdf EN ISO 1127-1996 en Stainless Steel Tubes - Dimensions Tolerances and Conventional Masses Per Unit Length《不锈钢管 尺寸 公差和单位长度的公称质量 ISO 1127-1992》.pdf
  • EN ISO 1133-1-2011 en Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1 Standard method《热塑性塑料熔体质量流动速率(MFR)和熔体体积流动.pdf EN ISO 1133-1-2011 en Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1 Standard method《热塑性塑料熔体质量流动速率(MFR)和熔体体积流动.pdf
  • EN ISO 1133-2-2011 en Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2 Method for materials sensitive to time-te.pdf EN ISO 1133-2-2011 en Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2 Method for materials sensitive to time-te.pdf
  • EN ISO 1135-3-2017 en Transfusion equipment for medical use - Part 3 Bloodtaking sets for single use《医用输液设备-第3部分 一次性使用采血组(ISO 1135-3 2016)》.pdf EN ISO 1135-3-2017 en Transfusion equipment for medical use - Part 3 Bloodtaking sets for single use《医用输液设备-第3部分 一次性使用采血组(ISO 1135-3 2016)》.pdf
  • EN ISO 1135-4-2012 8750 Transfusion equipment for medical use - Part 4 Transfusion sets for single use《医用输血器械 第4部分 一次性使用输血器  医用输血器械 第4部分 一次性使用输血器医用输血器械 第4部分 一次性使用输血器》.pdf EN ISO 1135-4-2012 8750 Transfusion equipment for medical use - Part 4 Transfusion sets for single use《医用输血器械 第4部分 一次性使用输血器 医用输血器械 第4部分 一次性使用输血器医用输血器械 第4部分 一次性使用输血器》.pdf
  • EN ISO 1135-4-2015 en Transfusion equipment for medical use - Part 4 Transfusion sets for single use gravity feed《医用输液设备 第4部分 一次性使用输血器 重力饲料 (ISO 1135-4 2015)》.pdf EN ISO 1135-4-2015 en Transfusion equipment for medical use - Part 4 Transfusion sets for single use gravity feed《医用输液设备 第4部分 一次性使用输血器 重力饲料 (ISO 1135-4 2015)》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1