FORD WSK-M3G204-A2-2010 LABEL PLASTIC SHEET PRESSURE SENSITIVE NOT REMOVABLE TO BE USED WITH FORD WSS-M99P1111-A 《不可清除的压敏式塑料薄膜标签 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD WSK-M3G204-.pdf

上传人:roleaisle130 文档编号:750578 上传时间:2019-01-14 格式:PDF 页数:2 大小:24.41KB
下载 相关 举报
FORD WSK-M3G204-A2-2010 LABEL PLASTIC SHEET PRESSURE SENSITIVE NOT REMOVABLE  TO BE USED WITH FORD WSS-M99P1111-A  《不可清除的压敏式塑料薄膜标签  与标准FORD WSS-M99P1111-A一起使用  列于标准FORD WSK-M3G204-.pdf_第1页
第1页 / 共2页
FORD WSK-M3G204-A2-2010 LABEL PLASTIC SHEET PRESSURE SENSITIVE NOT REMOVABLE  TO BE USED WITH FORD WSS-M99P1111-A  《不可清除的压敏式塑料薄膜标签  与标准FORD WSS-M99P1111-A一起使用  列于标准FORD WSK-M3G204-.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2010 06 22 N-STATUS Replaced by WSS-M99P41-A10/A72 G. Eaton, NA 2006 01 31 Revised Inserted 3.0; Deleted 3.1, 3.2, 3.3, 3.10, 4 1991 08 01 Released EPOOE01089487000 KW Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, L

2、LC Page 1 of 2 LABEL, PLASTIC SHEET, PRESSURE SENSITIVE WSK-M3G204-A1 LABEL, PLASTIC SHEET, PRESSURE SENSITIVE, NOT REMOVABLE WSK-M3G204-A2 NOT TO BE USED FOR NEW DESIGN 1. SCOPE The materials defined by these specifications are plastic labels. The back side of the labels is coated with a pressure s

3、ensitive adhesive, the surface is color printed according to Engineering Drawing and covered by a clear lacquer. The adhesive film is protected by release paper or polymer liner. WSK-M3G204-A2 is designed to be destroyed when removed. 2. APPLICATION These specifications were released originally for

4、certification labels fixed permanently to painted surfaces. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 APPEARANCE The labels shall be free o

5、f streaks, blisters, wrinkles, ragged edges or any other surface imperfections which make them unsuitable for the intended usage. Color and design shall be as specified on the Engineering Drawing. 3.5 SETTING TIME FOR NORMAL HANDLING The labels shall set sufficiently to permit normal handling immedi

6、ately after application. 3.6 THICKNESS 0.065 - 0.1 mm or as (ASTM D 1000) on Engineering Drawing Thickness of label plus adhesive without release paper or liner. 3.7 PREPARATION OF TEST SPECIMENS Prepare painted test panels according to FLTM BI 103-02, Method C. Apply the labels and press firmly usi

7、ng a rubber roller or equivalent. Condition per para 3.3. 3.8 ADHESION No loss of adhesion, no peeling, blistering or cracking permitted. The print shall not be removed by wiping with cleaning fuel. ENGINEERING MATERIAL SPECIFICATIONWSK-M3G204-A1/A2 Printed copies are uncontrolled Copyright 2010, Fo

8、rd Global Technologies, LLC Page 2 of 2 Slight color change may be accepted if the printing is still visible after test end. Labels per WSK-M3G204-A2 must be destroyed when removed, on original and on samples aged per 3.8.1, 3.8.2 and 3.8.3. Test Method: Adhesion shall be evaluated on original and a

9、ged test specimens prepared according to para 3.7. 3.8.1 Heat Aging (2 h at 70 +/- 2 C) Evaluation after cooling down to room temperature. 3.8.2 Paint Repair Oven (10 minutes at 100 +/- 2 C) Evaluation after cooling down to room temperature. 3.8.3 Cold Aging (4 h at -30 +/- 2 C) Evaluation after war

10、ming up to room temperature. 3.8.4 Environmental Cycling (FLTM BQ 104-07, Procedure 5, 5 cycles) Evaluation after 1 h conditioning at room temperature. 3.8.5 Immersion into Gasoline (Fuel per FLTM BO 101-05, 5 minutes at 23 +/- 2 C) Evaluation immediately after removal from the fuel. 3.8.6 Immersion

11、 into Engine Oil (ASTM D 471, Oil No. 3, 16 h at 23 +/- 2 C) After the immersion, the labels shall be wiped with cleaning fuel. Evaluation without reconditioning. 3.8.7 Accelerated Weathering 500 h (SAE J 1960) Evaluation after 1 h conditioning at room temperature. 5. GENERAL INFORMATION The informa

12、tion below is provided for clarification and assistance in meeting the requirements of this specification. 5.1 MATERIAL REFERENCE All related materials used for approval of labels according to this specification, e.g., paint materials or substrates, shall be noted in the Initial Sample Report of the label.

展开阅读全文
相关资源
猜你喜欢
  • EN 15635-2008 en Steel static storage systems - Application and maintenance of storage equipment《钢制静态存储设备 存储设备的应用和维护》.pdf EN 15635-2008 en Steel static storage systems - Application and maintenance of storage equipment《钢制静态存储设备 存储设备的应用和维护》.pdf
  • EN 15636-2010 en Sanitary appliances - Shower trays made from impact modified extruded acrylic sheets - Requirements and test methods《卫生用具 改良型挤压成型聚丙烯薄板材制淋浴盆的试验方法和要求》.pdf EN 15636-2010 en Sanitary appliances - Shower trays made from impact modified extruded acrylic sheets - Requirements and test methods《卫生用具 改良型挤压成型聚丙烯薄板材制淋浴盆的试验方法和要求》.pdf
  • EN 15637-2008 en Foods of plant origin - Determination of pesticide residues using LC-MS MS following methanol extraction and clean-up using diatomaceous earth《食用植物的食品 用硅藻盖土清理和甲醛萃取.pdf EN 15637-2008 en Foods of plant origin - Determination of pesticide residues using LC-MS MS following methanol extraction and clean-up using diatomaceous earth《食用植物的食品 用硅藻盖土清理和甲醛萃取.pdf
  • EN 15638-2009 en Ice skates - Safety requirements and test methods《溜冰鞋 安全要求和试验方法》.pdf EN 15638-2009 en Ice skates - Safety requirements and test methods《溜冰鞋 安全要求和试验方法》.pdf
  • EN 15643-1-2010 en Sustainability of construction works - Sustainability assessment of buildings - Part 1 General framework《建设可持续发展工程 建筑可持续性评估 第1部分 通用框架》.pdf EN 15643-1-2010 en Sustainability of construction works - Sustainability assessment of buildings - Part 1 General framework《建设可持续发展工程 建筑可持续性评估 第1部分 通用框架》.pdf
  • EN 15643-2-2011 en Sustainability of construction works - Assessment of buildings - Part 2 Framework for the assessment of environmental performance《建设工程的可持续性 建筑物评估 环境性能评估框架》.pdf EN 15643-2-2011 en Sustainability of construction works - Assessment of buildings - Part 2 Framework for the assessment of environmental performance《建设工程的可持续性 建筑物评估 环境性能评估框架》.pdf
  • EN 15643-3-2012 en Sustainability of construction works - Assessment of buildings - Part 3 Framework for the assessment of social performance《可持续性建筑作品 评估建筑-第3部分 社会绩效评估的框架》.pdf EN 15643-3-2012 en Sustainability of construction works - Assessment of buildings - Part 3 Framework for the assessment of social performance《可持续性建筑作品 评估建筑-第3部分 社会绩效评估的框架》.pdf
  • EN 15643-4-2012 en Sustainability of construction works - Assessment of buildings - Part 4 Framework for the assessment of economic performance《可持续性建筑作品 评估建筑-第4部分 经济性能的评估框架》.pdf EN 15643-4-2012 en Sustainability of construction works - Assessment of buildings - Part 4 Framework for the assessment of economic performance《可持续性建筑作品 评估建筑-第4部分 经济性能的评估框架》.pdf
  • EN 15643-5-2017 en Sustainability of construction works - Sustainability assessment of buildings and civil engineering works - Part 5 Framework on specific principles and requireme.pdf EN 15643-5-2017 en Sustainability of construction works - Sustainability assessment of buildings and civil engineering works - Part 5 Framework on specific principles and requireme.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1