1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2004 10 25 Activated C. Bezant Printed copies are uncontrolled Copyright 2004, Ford Global Technologies, LLC Page 1 of 1 DECORATIVE WOOD VENEER, MADRONA, ARBUTUS MENZIESII, BURL CUT WSS-M11G30-A DECORATIVE WOOD VENEER MADRONA, ARBUTUS MENZIESI
2、I, QUARTER CUT WSS-M11G30-A2 DECORATIVE WOOD VENEER, MADRONA, ARBUTUS MENZIESII, CROWN CUT WSS-M11G30-A3 1. SCOPE These specifications define wood veneers for use as decorative product on interior wood veneer assemblies. A = Madrona Arbutus Menziesii, Burl Cut A2 = Madrona Arbutus Menziesii, Quarter
3、 Cut A3 = Madrona Arbutus Menziesii, Crown Cut 2. APPLICATION The specifications WSS-M11G30-A/A3 were released for materials used for wooden decorative automotive components. Application of lacquer and other products will need to be considered to provide a suitable finished product. 3. REQUIREMENTS
4、Material specification requirements are to be used for initial qualification of materials. When in the fully assembled form the veneer assembly must perform to the Material specification requirements of WSS-M15P34-B1 or as specified on the engineering drawing. 3.1 STANDARD REQUIREMENTS FOR PRODUCTIO
5、N MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 MATERIAL PROPERTIES 3.2.1 Appearance Color, feature and grain to be as per Master samples 3.2.2 Thickness Nominal thickness - 0.6mm 3.2.3 Moisture content 11 - 18% 3.2.4 Density A/A2/A3 517.6 - 718.2 +/- 50 Kgm-33.3 PERFORMANCE PROPERTIES Veneer selected for its attractive appearance should be uniform in thickness, smooth, flat, free from decay and have face grain suitable for the intended face grade
