1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2004 07 19 Activated C. Bezant Printed copies are uncontrolled Copyright 2004, Ford Global Technologies, LLC Page 1 of 1 DECORATIVE WOOD VENEER, TULIP-LIRIODENDRON TULIPIFERA WSS-M11G31-A DECORATIVE WOOD VENEER, TULIP-LIRIODENDRON TULIPIFERA,
2、CROWN CUT WSS-M11G31-A2 DECORATIVE WOOD VENEER, TULIP-LIRIODENDRON TULIPIFERA, QUARTER CUT WSS-M11G31-A3 1. SCOPE These specifications define wood veneers for use as decorative product on interior wood veneer assemblies: A Tulip-Lirodendron Tulipifera A2 Tulip Liriodendron Tulipifera Crown Cut A3 Tu
3、lip Liriodendron Tulipifera Quarter Cut 2. APPLICATION The specifications WSS-M11G31-A/A3 were released for materials used for wooden decorative automotive components. Application of lacquer and other products will need to be considered to provide a suitable finished product. 3. REQUIREMENTS Materia
4、l specification requirements are to be used for initial qualification of materials. When in the fully assembled form the veneer assembly must perform to the material specification requirements of WSS-M15P34-B1 or as specified on the engineering drawing. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATER
5、IALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 MATERIAL PROPERTIES 3.2.1 Appearance Color, feature and grain to be as per Master samples 3.2.2 Thickness Nominal thickness - 0.6mm 3.2.3 Moisture content 11 - 18% 3.2.4 Density A/A2/A3 470.3 - 538.5 +/- 50 Kgm-33.5 PERFORMANCE PROPERTIES Veneer selected for its attractive appearance should be uniform in thickness, smooth, flat, free from decay and have face grain suitable for the intended face grade
