1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2004 09 28 Activated C. Bezant Printed copies are uncontrolled Copyright 2004, Ford Global Technologies, LLC Page 1 of 1 DECORATIVE WOOD VENEER, PRESTAINED WHITE OAK- WSS-M11G38-A1 QUERCUS ALBA, CROWN CUT DECORATIVE WOOD VENEER PRESTAINED WHIT
2、E OAK- WSS-M11G38-A2 QUERCUS ALBA, QUARTER CUT 1. SCOPE These specifications define wood veneers for use as decorative product on interior wood veneer assemblies. A1 = Prestained White Oak Quercus Alba, Crown Cut A2 = Prestained White Oak Quercus Alba, Quarter Cut 2. APPLICATION The specifications W
3、SS-M11G38-A1/A2 were released for materials used for wooden decorative automotive components. Application of lacquer and other products will need to be considered to provide a suitable finished product. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of m
4、aterials. When in the fully assembled form the veneer assembly must perform to the Material specification requirements of WSS-M15P34-B1 or as specified on the engineering drawing. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys St
5、andard Requirements For Production Materials (WSS-M99P1111-A). 3.2 MATERIAL PROPERTIES 3.2.1 Appearance Color, feature and grain to be as per Master samples 3.2.2 Thickness, nominal thickness 0.6mm 3.2.3 Moisture content 11 - 18% 3.2.4 Density 625 +/- 50 Kgm-33.5 PERFORMANCE PROPERTIES Veneer selected for its attractive appearance should be uniform in thickness, smooth, flat, free from decay and have face grain suitable for the intended face grade
