1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2006 07 19 Activated N. J. Komatsu Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, Inc. Page 1 of 2 FABRIC, PAPERCUT PATTERN, WOVEN JACQUARD, WSS-M1H1003-A UNLAMINATED 1. SCOPE The material defined by this specificati
2、on is a woven jacquard polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the 2006 Model Year. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. In addition
3、to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2
4、 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Warp 240 ends/10 cm Weft 180 picks/10 cm 3.2.2 Fabric Weight, range (FLTM BN 106-01) 375 - 415 g/m23.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 890 dtex f 188 (air texturized, semi
5、dull) Weft 825 dtex f188 (air texturized, semi-dull) ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1003-APrinted copies are uncontrolled Copyright 2006, Ford Global Technologies, Inc. Page 2 of 2 3.5 METHOD OF DYEING Yarn dyed or as approved by Materials Engineering 3.6 FINISHED OPERATIONS As approved b
6、y Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
