1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2005 06 15 Activated L. Neves Printed copies are uncontrolled Copyright 2005, Ford Global Technologies, LLC Page 1 of 2 FABRIC, MONTANA CHARCOAL BLACK PATTERN, WARP KNITTED, WSS-M1H1004-A UNLAMINATED 1. SCOPE The material defined by this speci
2、fication is a warp knitted polyester fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2007 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as a
3、pplicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 6% tolerance (ASTM D 3775) Wales 110 wales/10cm Courses 25
4、0 courses/10 cm 3.2.2 Fabric Weight, +/- 6% tolerance 320 g/m (FLTM BN 106-01) 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Pile/Back 100 dtex, f34, Semi Dull, Round, Textured Polyester 3.5 METHOD OF DYEING Piece Dyed ENGINEERING MATERIAL SPECIFICATIONWSS-M1
5、H1004-A Printed copies are uncontrolled Copyright 2005, Ford Global Technologies, LLC Page 2 of 2 3.6 FINISHING OPERATIONS Knit, Dye, Heat Set 3.7 TRIMMABILITY PROPERTIES 3.7.1 Stretch, range Stretch %, Wales 8 18% Courses 25 35% 3.8 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute Note
6、 Not required on face fabric when used as a fully bonded composite. 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.
