1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2015 12 09 N Status No replacements named D. Murtonen, NA 2005 06 15 Activated L. Neves Copyright 2015, Ford Global Technologies, LLC Page 1 of 2 FABRIC, LUGANO CHARCOAL BLACK PATTERN, WARP KNITTED, WSS-M1H1005-A UNLAMINATED NOT TO BE USED FO
2、R NEW DESIGN 1. SCOPE The material defined by this specification is a warp knitted polyester fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2007 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric s
3、hall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 6%
4、 tolerance (ASTM D 3775) Wales 130 wales/10 cm Courses 230 courses/10 cm 3.2.2 Fabric Weight, +/- 6% tolerance 240 g/m (FLTM BN 106-01) 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Pile 70 dtex f36, Semi-Dull, Round, Textured Polyester Back 70 dtex f36, Semi
5、 Dull, Round, Flat Polyester ENGINEERING MATERIAL SPECIFICATION WSS-M1H1005-A Copyright 2015, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Piece Dyed 3.6 FINISHING OPERATIONS Knit, Dye, Raise, Heat Set 3.7 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/min. Note: Not requir
6、ed on face fabric when used as a fully bonded composite. 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.
