1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2005 09 28 Activated L. Neves Printed copies are uncontrolled Copyright 2005, Ford Global Technologies, LLC Page 1 of 2 FABRIC, ODESSA MEDIUM DARK DOVE PATTERN, WOVEN, WSS-M1H1006-A UNLAMINATED 1. SCOPE The material defined by this specificati
2、on is a woven polyester fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2007 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.
3、1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 6% tolerance (ASTM D 3775) Warp 360 yarn/10cm Fill 200 yarn/10 cm 3.2.2
4、 Fabric Weight, +/- 6% tolerance 290 g/m (FLTM BN 106-01) 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 500 dtex, f132, Semi Dull, Round, Textured Polyester Fill 330 dtex, f68, Semi Dull, Round, Textured Polyester 3.5 METHOD OF DYEING Yarn Dyed ENGINEERI
5、NG MATERIAL SPECIFICATIONWSS-M1H1006-A Printed copies are uncontrolled Copyright 2005, Ford Global Technologies, LLC Page 2 of 2 3.6 FINISHING OPERATIONS Warp, Wash, Heat Set 3.7 TRIMMABILITY PROPERTIES 3.7.1 Stretch, range Stretch %, - Wales 3 6% - Courses 2 5% 3.8 FLAMMABILITY (ISO 3795/SAE J369)
6、Burn Rate, max 100 mm/minute Note: Not required on face fabric when used as a fully bonded composite. 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.
