1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2015 12 09 N Status No replacements named D. Murtonen, NA 2006 11 08 Activated M. Dumitrescu Copyright 2015, Ford Global Technologies, LLC Page 1 of 2 FABRIC, VERANDA RF PATTERN, WARP KNIT WSS-M1H1013-A2 TREATED WITH REPELLANT FINISH NOT TO B
2、E USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a VERANDA RF PATTERN, 4 bars, 56 gauge, single needle bar, body cloth of good quality and uniform composition. The fabric is treated with repellant finish to prevent the staining. This fabric is backcoated. 2. APPLICATION T
3、his specification was released originally for material used as an interior trim fabric for 2007 U387 seat insert. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. In addition, to the requirements listed herein, the fabric shall meet all requi
4、rements of WSS-M8P18-A1/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3887)
5、Wales 165 wales/10 cm Courses 161 courses/10 cm 3.2.2 Fabric Weight, +/- 5%, g/m2 (FLTM BN 106-01) Face w/ Backcoat 352 Laminated to 3 mm foam 487 ENGINEERING MATERIAL SPECIFICATION WSS-M1H1013-A2 Copyright 2015, Ford Global Technologies, LLC Page 2 of 2 3.3 COMPOSITION (ASTM D 629) Tolerance as spe
6、cified in WSS-M8P18-A1/A4 Fabric 100% Polyester Backcoat Acrylic backcoat 3.4 YARN CONSTRUCTION (ASTM D 1244) Face A 15% 11.1 tex f34 (text polyester) B 15% 11.1 tex f34 (text polyester) Middle 35% 16.7 texf36 (text polyester) Back 35% 7.8 tex f34 (text polyester) 3.5 METHOD OF DYEING Piece Dye 3.6 FINISHING OPERATIONS Knit, heat set, setmake, dye, tenter dry, tenter repellant, tender backcoat, inspect Note: Veranda RF fabric is treated with 1% Milliken Repellant finish to prevent staining caused by water based agents.
