1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2016 04 27 N Status No longer used D. Murtonen, NA 2006 05 22 Activated M. Dumitrescu Copyright 2016, Ford Global Technologies, LLC Page 1 of 2 FABRIC, JACKIE PATTERN, KNIT SEAT FACINGS/SEAT BACKS WSS-M1H1021-A NOT TO BE USED FOR NEW DESIGN 1
2、 SCOPE The material defined by this specification is a JACKIE PATTERN, 2 bars, 28 Gauge, TRICOT knit, body cloth of good quality and uniform composition. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2008 MAZDA TRIBUTE on leather seats fo
3、r seat side facings and seat backs only. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. In addition, to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR P
4、RODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3887) Wales 169 wales/10 cm Courses 260 courses/10 cm 3.2.2 Fabric Weight, rang
5、e, g/m2 (FLTM BN 106-01) Laminated * Face w/no Backcoat 391 - 432 243 - 269 * 3 mm foam thickness 3.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4 Fabric 100% Polyester ENGINEERING MATERIAL SPECIFICATION WSS-M1H1021-A Copyright 2016, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Face (A) 75% 10.0 tex(natural polyester) Back 25% 7.8 tex (natural Polyester) 3.5 METHOD OF DYEING Piece Dye 3.6 FINISHING OPERATIONS Bulk, preset, suede, dye, heatset
