1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2016 04 27 N Status No longer used D. Murtonen, NA 2009 07 30 Activated R. Kyle, APA Copyright 2016, Ford Global Technologies, LLC Page 1 of 2 FABRIC, MONDUS MAX ASEAN, WOVEN DOBBY, WSS-M1H1038-A UNLAMINATED NOT TO BE USED FOR NEW DESIGN 1. S
2、COPE The material defined by this specification is a woven dobby polyester face fabric, Mondus Max pattern. 2. APPLICATION WSS-M1H1038-A has been introduced as an interior trim fabric for use in the B299 ASEAN program Model 2009, as a seat bolster. 3. REQUIREMENTS In addition to the requirements lis
3、ted herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.
4、2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 143 ends/ 10 cm Weft 138 picks/ 10 cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) 265 g/m2 3.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 840 dtex f408 (air jet textured) Weft 840 dtex f408
5、air jet textured) ENGINEERING MATERIAL SPECIFICATION WSS-M1H1038-A Copyright 2016, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Solution Dye or as approved by Materials Engineering 3.6 FINISHED OPERATIONS As approved by Materials Engineering - Washing ( Scour ) - Stenter Finish 4.
6、 GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
