1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 02 2014 11 12 Re-Activated M. Montgomery, EU 2014 07 07 Inactive No replacement named M. Montgomery, EU 2009 07 30 Activated M. Montogomery, EU Controlled document at www.MATS Copyright 2014, Ford Global Technologies, LLC Page 1 of 2 FABR
2、IC, AMBASSADOR DOORPANEL, DOBBY WOVEN, WSS-M1H1039-A UNLAMINATED 1. SCOPE The material defined by this specification is a woven dobby polyester fabric. 2. APPLICATION This specification was released originally for material used as an interior door panel fabric for use in the CD3xx, C346 and C344. 3.
3、 REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Mater
4、ials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Warp 190 ends/10 cm Weft 190 picks/10 cm 3.2.2 Fabric Weight, +/- 10% tolerance (FLTM BN 106-01) 260 g/m2 3.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 550
5、dtex f 144, (Semidull, Round, False Twist, Twisted) Weft 550dtex f144, (Semidull, Round, False Twist, Twisted) ENGINEERING MATERIAL SPECIFICATION WSS-M1H1039-A Copyright 2014, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING PIECE DYED 3.6 FINISHED OPERATIONS PIECEDYE; POSTSTENTER 4. G
6、ENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. 4.1 Purchase departments will ensure that material defined in this specification and s
7、hipped to any one assembly plant will be produced by one supplier only. 4.2 In the case of specific laminates, shades, or processes, back coating of the fabric may be necessary to aid process or performance. This additional requirement will be technically and commercially assessed and specified on an individual case basis. 4.3 This fabric was introduced as a replacement for WSS-M1H1049-A Excelsior fabric to improve moir effect that was evident in lighter colours of Excelsior. 4.4 Fabric to be only used as a door insert fabric, not suitable for seating application.
