1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2016 04 27 N Status No longer used D. Murtonen, NA 2007 01 19 Activated M. Montgomery Copyright 2016, Ford Global Technologies, LLC Page 1 of 2 FABRIC, EXCELSIOR, DOBBY WOVEN, UNLAMINATED WSS-M1H1049-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE T
2、he material defined by this specification is a woven dobby polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the CD345 Titanium. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet
3、 all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% toleran
4、ce (ASTM D 3775) Warp 192 ends/10 cm Weft 160 picks/10 cm 3.2.2 Fabric Weight, +/- 10% tolerance (FLTM BN 106-01) 230 g/m2 3.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 600 dtex f 144, Semi-dull Round AJT Weft 550 dtex f136, Semi-dull Round False Twist E
5、NGINEERING MATERIAL SPECIFICATION WSS-M1H1049-A Copyright 2016, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Piece Dyed 3.6 FINISHED OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
