1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions Ver 12008 05 19 Activated M. Montgomery, FOE Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, DAPHNE PATTERN, DOBBY WOVEN, UNLAMINATED WSS-M1H1058-A 1. SCOPE The material defined by this specifi
2、cation is a woven dobby polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the CD340 mca. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/
3、A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Warp 235 ends/10 cm Wef
4、t 155 picks/10 cm 3.2.2 Fabric Weight, +/- 10 % tolerance (FLTM BN 106-01) 310 g/m23.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp Package Dyed - 620dtex, f 102 (Air Jet Texturised) Weft Package Dyed - 540dtex, f 128 (Air Jet Texturised) Package Dyed Ribbo
5、n Effect Nm 2.5 (dtex 4000) ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1054-APrinted copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Package Dyed (warp & weft yarn/components) 3.6 FINISHED OPERATIONS Antistatic treatment/ Washing/thermo fixation 4
6、. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only. 4.2 This fabric belongs to CD340 mca.
