1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2016 05 05 N Status No longer used D. Murtonen, NA 2009 01 22 Activated M. Montgomery, FOE Copyright 2016, Ford Global Technologies, LLC Page 1 of 2 FABRIC, WEBB PATTERN, CIRCULAR KNITTED FABRIC, WSS-M1H1062-A UNLAMINATED NOT TO BE USED FOR N
2、EW DESIGN 1. SCOPE The material defined by this specification is a Jacquard Circular Knitted polyester face fabric. 2. APPLICATION WSS-M1H1062-A has been introduced as an interior trim fabric for use in the B299 China Model, as a seat insert. 3. REQUIREMENTS In addition to the requirements listed he
3、rein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fa
4、bric Count, +/- 8% tolerance (ASTM D 3775) Wales 118 /10 cm Courses 106 /10 cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) 552 g/m2 3.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Weft dtex 300f96, (Draw Textured semi dull polyester ) Weft dtex 300f9
5、6, (Air Textured semi dull CD polyester ) ENGINEERING MATERIAL SPECIFICATION WSS-M1H1062-A Copyright 2016, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Piece Dyed or as approved by Materials Engineering 3.6 FINISHED OPERATIONS - Piece dyeing - Resining - Setting - Back Coating - Se
6、tting Or as approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
