1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 1 2016 07 25 N Status Replaced by WRS-M1H1068-A1 / A21 R. Kyle, EU 2012 04 04 Activated M. Montgomery, EU Controlled document at www.MATS Copyright 2016, Ford Global Technologies, LLC Page 1 of 2 FABRIC, LANE PATTERN, WOVEN JACQUARD, WSS
2、M1H1068-A UNLAMINATED NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a woven jacquard polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the V36x 2013 Model Year. 3. REQUIREME
3、NTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-
4、M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10 % tolerance (ASTM D3775) Warp 230 ends/10 cm Weft 135 picks/10 cm 3.2.2 Fabric Weight, +/- 10 % tolerance (FLTM BN 106-01) 325 g/m2 3.3 COMPOSITION (ASTM D629) Fabric 100 % polyester 3.4 YARN CONSTRUCTION (ASTM D1244) Warp 830dtex f 188
5、 (Air jet textured) Weft 830dtex f 188 (Air jet textured) ENGINEERING MATERIAL SPECIFICATION WSS-M1H1068-A Copyright 2016, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Yarn dyed or as approved by Materials Engineering 3.6 FINISHED OPERATIONS -Washing, drying, heat set As approved b
6、y Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. 4.1 Purchase departments will ensure that both materials d
7、efined in this specification and shipped to any one assembly plant will be produced by one supplier only. 4.2 Global cross car line strategies to use Tri-laminate construction in all regions. 4.3 If yarn is locally sourced it must meet the above fabric construction for Composition & Yarn Construction. The fabric must also meet the requirements of WSS-M8P18-A1/A2/A3/A4.
