FORD WSS-M1H1082-A-2006 FABRIC SINAI MIDNIGHT BLACK PATTERN WOVEN JACQUARD TO BE USED WITH FORD WSS-M99P1111-A 《SINAI MIDNIGHT BLACK图案的提花机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

上传人:fuellot230 文档编号:751788 上传时间:2019-01-14 格式:PDF 页数:2 大小:25.16KB
下载 相关 举报
FORD WSS-M1H1082-A-2006 FABRIC SINAI MIDNIGHT BLACK PATTERN WOVEN JACQUARD  TO BE USED WITH FORD WSS-M99P1111-A  《SINAI MIDNIGHT BLACK图案的提花机织织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第1页
第1页 / 共2页
FORD WSS-M1H1082-A-2006 FABRIC SINAI MIDNIGHT BLACK PATTERN WOVEN JACQUARD  TO BE USED WITH FORD WSS-M99P1111-A  《SINAI MIDNIGHT BLACK图案的提花机织织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2006 06 12 Activated L. Neves Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 1 of 2 FABRIC, SINAI MIDNIGHT BLACK PATTERN, WOVEN JACQUARD WSS-M1H1082-A 1. SCOPE The material defined by this specification is a

2、 woven jacquard polyester fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for B402 - 2008 Model Year. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. In addition to the requireme

3、nts listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUC

4、TION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 28 yarn/cm Fill 19 yarn/cm 3.2.2 Fabric Weight, +/-10% tolerance, 370 - 471 g/m laminated to 3 mm foam (FLTM BN 106-01) 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester Foam PUR/Polyether Backing Fabric 100% Polyester ENGINEERING MATERIA

5、L SPECIFICATIONWSS-M1H1082-A Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 550 dtex, f 144, Semi Dull, Round, Textured Polyester Fill 393 dtex, f 96, Semi Dull, Round, False twist Polyester 3.5 METHOD OF DYEING Warp

6、 Solution Dyed Fill Yarn Dyed 3.6 FINISHING OPERATIONS Heat Set 3.7 THICKNESS, mm, range 2.0 - 2.9 mm (ASTM D 1777) 3.8 TRIMMABILITY PROPERTIES 3.8.1 Stretch, %, range (SAE J855) Warp 5 - 9% Fill 3 - 7% 3.9 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.

展开阅读全文
相关资源
猜你喜欢
  • EN 50180-2-2015 en Bushings above 1 kV up to 52 kV and from 250 A to 3 15 kA for liquid filled transformers - Part 2 Requirement for bushing components.pdf EN 50180-2-2015 en Bushings above 1 kV up to 52 kV and from 250 A to 3 15 kA for liquid filled transformers - Part 2 Requirement for bushing components.pdf
  • EN 50180-2010 2500 Bushings above 1 kV up to 52 kV and from 250 A to 3 15 kA for liquid filled transformers《充液变压器用大于1 kV小于或等于52 kV和范围为250 A至3 15 kA的套管》.pdf EN 50180-2010 2500 Bushings above 1 kV up to 52 kV and from 250 A to 3 15 kA for liquid filled transformers《充液变压器用大于1 kV小于或等于52 kV和范围为250 A至3 15 kA的套管》.pdf
  • EN 50180-3 A1-2017 en Bushings above 1 kV up to 52 kV and from 250 A to 3 15 kA for liquid filled transformers - Part 3 Requirements for bushing fixations.pdf EN 50180-3 A1-2017 en Bushings above 1 kV up to 52 kV and from 250 A to 3 15 kA for liquid filled transformers - Part 3 Requirements for bushing fixations.pdf
  • EN 50180-3-2015 en Bushings above 1 kV up to 52 kV and from 250 A to 3 15 kA for liquid filled transformers - Part 3 Requirements for bushing fixations.pdf EN 50180-3-2015 en Bushings above 1 kV up to 52 kV and from 250 A to 3 15 kA for liquid filled transformers - Part 3 Requirements for bushing fixations.pdf
  • EN 50181-2010 en Plug-in type bushings above 1 kV up to 52 kV and from 250 A to 2 50 kA for equipment other than liquid filled transformers《不包括液体填充变压器在内的设备用大于1 KV小于等于52 KV和250 A至2 .pdf EN 50181-2010 en Plug-in type bushings above 1 kV up to 52 kV and from 250 A to 2 50 kA for equipment other than liquid filled transformers《不包括液体填充变压器在内的设备用大于1 KV小于等于52 KV和250 A至2 .pdf
  • EN 50182-2001 en Conductors for overhead lines - Round wire concentric lay stranded conductors (Incorporating corrigendum July 2013)《架空线导体 圆形同轴多股电缆芯线的导体 合并勘误表2004年4月》.pdf EN 50182-2001 en Conductors for overhead lines - Round wire concentric lay stranded conductors (Incorporating corrigendum July 2013)《架空线导体 圆形同轴多股电缆芯线的导体 合并勘误表2004年4月》.pdf
  • EN 50183-2000 en Conductors for Overhead Lines Aluminium-Magnesium-Silicon Alloy Wires《架空线导体 铝镁硅合金导线》.pdf EN 50183-2000 en Conductors for Overhead Lines Aluminium-Magnesium-Silicon Alloy Wires《架空线导体 铝镁硅合金导线》.pdf
  • EN 50186-1-1998 en CORR Live-Line Washing Systems for Power Installations with Nominal Voltages Above 1kV Part 1 Common Requirements (Incorporating Corrigendum January 1999)《额定电压超过.pdf EN 50186-1-1998 en CORR Live-Line Washing Systems for Power Installations with Nominal Voltages Above 1kV Part 1 Common Requirements (Incorporating Corrigendum January 1999)《额定电压超过.pdf
  • EN 50186-2-1998 en Live-Line Washing Systems for Power Installations with Nominal Voltages Above 1kV Part 2 National Annexes《额定电压超过1 KV的电力洗衣系统 第2部分 国家附录》.pdf EN 50186-2-1998 en Live-Line Washing Systems for Power Installations with Nominal Voltages Above 1kV Part 2 National Annexes《额定电压超过1 KV的电力洗衣系统 第2部分 国家附录》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1