1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2016 05 05 N Status No longer used D. Murtonen, NA 2006 06 12 Activated L. Neves Copyright 2016, Ford Global Technologies, LLC Page 1 of 2 FABRIC, SINAI MIDNIGHT BLACK PATTERN, WOVEN JACQUARD WSS-M1H1082-A NOT TO BE USED FOR NEW DESIGN 1. SCO
2、PE The material defined by this specification is a woven jacquard polyester fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for B402 - 2008 Model Year. 3. REQUIREMENTS Material specification requirements are to be used for initial qualif
3、ication of materials. In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Producti
4、on Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 28 yarn/cm Fill 19 yarn/cm 3.2.2 Fabric Weight, +/-10% tolerance, 370 - 471 g/m laminated to 3 mm foam (FLTM BN 106-01) 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester Foam PUR/Polyether
5、 Backing Fabric 100% Polyester ENGINEERING MATERIAL SPECIFICATION WSS-M1H1082-A Copyright 2016, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 550 dtex, f 144, Semi Dull, Round, Textured Polyester Fill 393 dtex, f 96, Semi Dull, Round, False twist Polyester 3.5 ME
6、THOD OF DYEING Warp Solution Dyed Fill Yarn Dyed 3.6 FINISHING OPERATIONS Heat Set 3.7 THICKNESS, mm, range 2.0 - 2.9 mm (ASTM D 1777) 3.8 TRIMMABILITY PROPERTIES 3.8.1 Stretch, %, range (SAE J855) Warp 5 - 9% Fill 3 - 7% 3.9 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.
