FORD WSS-M1H1097-A-2008 FABRIC BIRMINGHAM PATTERN KNIT TREATED WITH REPELLANT FINISH TO BE USED WITH FORD WSS-M99P1111-A 《经拒水处理针织 Birmingham图案织物(和 FORD WSS-M99P1111-A一起使用)》.pdf

上传人:amazingpat195 文档编号:751812 上传时间:2019-01-14 格式:PDF 页数:2 大小:40.09KB
下载 相关 举报
FORD WSS-M1H1097-A-2008 FABRIC BIRMINGHAM PATTERN KNIT TREATED WITH REPELLANT FINISH  TO BE USED WITH FORD WSS-M99P1111-A  《经拒水处理针织 Birmingham图案织物(和 FORD WSS-M99P1111-A一起使用)》.pdf_第1页
第1页 / 共2页
FORD WSS-M1H1097-A-2008 FABRIC BIRMINGHAM PATTERN KNIT TREATED WITH REPELLANT FINISH  TO BE USED WITH FORD WSS-M99P1111-A  《经拒水处理针织 Birmingham图案织物(和 FORD WSS-M99P1111-A一起使用)》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Ver. 2 2008 08 19 Revised Revised Title and paragraph 1 M. Dumitrescu, FNA 2006 06 30 Activated M. Dumitrescu, FNA Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, BIRMINGHAM PATTERN, KNIT WSS-

2、M1H1097-A TREATED WITH REPELLANT FINISH 1. SCOPE The material defined by this specification is a BIRMINGHAM PATTERN, 4 bars, 28 Gauge, TRICOT knit, body cloth of good quality and uniform composition. The fabric has the same construction as Del Rey fabric that it is embossed to create Birmingham patt

3、ern. The fabric is treated with repellant finish to prevent staining. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2008 D333 seat insert. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of mate

4、rials. In addition, to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M9

5、9P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3887) Wales 138 wales/10 cm Courses 291 courses/10 cm 3.2.2 Fabric Weight, range, g/m2 (FLTM BN 106-01) Laminated * Face w/no Backcoat 450 614 312 - 345 * 3 mm foam thickness ENGINEERING MATERIAL SPECIFICATION WSS-M1H109

6、7-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4 Fabric 100% Polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Face (A) 7.8 tex (natural text polyester) (B) 7.8 tex (natural polyester) Middle 7.8 tex (natural polyester) Back 11.1 tex (natural Polyester) 3.5 METHOD OF DYEING Piece Dye 3.6 FINISHING OPERATIONS Knit, Wash, Preset, Dye, Heatset, Inspect Note: the fabric is treated with repellant finish to prevent staining caused by water based agents

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1