1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2006 10 23 Activated L. Neves Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 1 of 2 FABRIC, MENDOZA CHARCOAL BLACK PATTERN, WOVEN JACQUARD WSS-M1H1098-A 1. SCOPE The material defined by this specification is
2、 a woven jacquard polyester fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for Focus - 2007 Model Year. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. In addition to the requir
3、ements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONST
4、RUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 29 yarn/cm Fill 18 yarn/cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) (laminated to 4 mm foam + backing fabric) 370 g/m 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester Foam PUR/Polyester Backing Fabric 100% Polyester ENGI
5、NEERING MATERIAL SPECIFICATIONWSS-M1H1098-A Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 450 dtex, f 48, Semi Dull, Round, Textured Polyester Fill Anthracite (Yarn Dyed) 167x2 dtex, f 0, Semi dull, Round, Textured
6、Polyester Charcoal (Yarn Dyed) 250x2 dtex, f 72, Semi dull, Round, Textured Polyester 3.5 FINISHING OPERATIONS Wash, Heat Set 3.6 THICKNESS, mm, range (ASTM D 1777) (laminated to 4 mm foam + backing fabric) 3.0 - 4.0 mm 3.7 TRIMMABILITY PROPERTIES 3.7.1 Stretch, %, range (SAE J855) Warp 5.0 +/- 3.0%
7、 Fill 5.0 +/- 3.0% 3.8 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.
