1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2016 05 05 N Status No replacement D. Murtonen, NA 2007 05 22 Activated L. Neves Copyright 2016, Ford Global Technologies, LLC Page 1 of 2 FABRIC, BELMONTE PATTERN, WOVEN WSS-M1H1099-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defin
2、ed by this specification is a woven polyester fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for BV 226 - 2008 Model Year. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. In add
3、ition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A
4、). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 29 yarn/cm Fill 18 yarn/cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) Seat (laminated to 4 mm foam) 400 g/m Door Panel (laminated to 3 mm foam) 350 g/m 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester Fo
5、am - Seat PUR/Polyester D28 4 mm Foam Door Panel PUR/Polyester D36 3 mm Backing Fabric (Seats only) 100% Polyester 50 g/m ENGINEERING MATERIAL SPECIFICATION WSS-M1H1099-A Copyright 2016, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 450 dtex, f 48, Semi Dull, Rou
6、nd, Textured Polyester Fill 500 dtex, f 68, Brilliant, Round, Textured Polyester 3.5 METHOD OF DYEING Warp Yarn Dyed Fill Solution Dyed 3.6 FINISHING OPERATIONS Warp, Wash, Heat Set 3.7 THICKNESS, mm, (ASTM D 1777) Seat (laminated to 4 mm foam + backing fabric) 3.0 a 4.0 mm Door Panel (laminated to
7、2 mm foam) 2.0 3.0 mm 3.8 TRIMMABILITY PROPERTIES 3.8.1 Stretch, %, range (SAE J855) Seat and Door Panel Warp 5% +/- 3% Fill 5% +/- 3% 3.9 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.
