1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2006 12 13 Activated L. Neves Printed copies are uncontrolled Copyright 2005, Ford Global Technologies, LLC Page 1 of 2 FABRIC, OHIO MID DARK GRAPHITE, WOVEN JACQUARD WSS-M1H1107-A 1. SCOPE The material defined by this specification is a woven
2、 jacquard polyester fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for Courier seats and door panel. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as appli
3、cable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 10% tolerance (ASTM D 3775) Warp 18 yarn/cm Fill 26 yarn/cm 3.
4、2.2 Fabric Weight, +/- 10% tolerance (FLTM BN 106-01) Seat (laminated to 2 mm foam) 460 g/m Door Panel (laminated to 5.5 mm foam) 503 g/m 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester Foam Door Panel PUR/Polyester D35 5.5mm +/-0.5 mm Foam Seat PUR/Polyether D28 2.0mm +/- 0.5 mm Backing Fabric (
5、Seats only) 100% Knitted Polyester, 45 g/m2+/- 10% ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1107-A Printed copies are uncontrolled Copyright 2005, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 400 dtex f96 Semi Dull, Round, Fixed False Twist Textured Polyester Fi
6、ll 800 dtex f192 Semi Dull, Round, Air Textured Polyester 600 dtex f168 Semi Dull, Round, Air Textured Polyester 3.5 METHOD OF DYEING Warp Yarn Dyed Fill Yarn Dyed 3.6 FINISHING OPERATIONS Heat Set 3.7 THICKNESS, mm, range (ASTM D 1777) Seat (laminated to 2.0 mm foam) 2.0 4.0 mm Door Panel (laminate
7、d to 5.5 mm foam) 6.0 7.1 mm 3.8 TRIMMABILITY PROPERTIES 3.8.1 Stretch, %, range (SAE J855) Seat Warp 3.0 10.0% Fill 2.0 6.0% Door Panel Warp 3.0 10.0% Fill 2.0 8.0% 3.9 FLAMMABILITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.
