1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 01 09 Activated M. Dumitrescu Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, DASH PATTERN, FLAT WOVEN 25% MINIMUM WSS-M1H1133-A POST INDUSTRIAL CONTENT 1. SCOPE The material defined by th
2、is specification is a DASH pattern, Jacquard, flat woven bodycloth of good quality and uniform composition. The fabric is backcoated. 2. APPLICATION This specification was released originally for material used as a seat fabric, insert application for 2010 CD338. 3. REQUIREMENTS In addition to the re
3、quirements listed herein, the fabric shall meet all requirements of: WSS-M8P18-A1/A4. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A) 3.2 FABRIC CONSTRUCTION 3.2.1 Fa
4、bric Count, +/- 5% tolerance (ASTM D 3775) Warp 298 ends/10 cm Fill 180 picks/10 cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) Face Fabric w/backcoat 350 g/m23.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4. Fabric 100% Polyester Backcoating Acrylic ENGINEERING MATE
5、RIAL SPECIFICATIONWSS-M1H1133-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 16.7 tex f48 (false twist polyester) x 3 Fill 16.7 tex f48 (false twist 100% PI polyester yarn) x 3 16.7 tex f48 (false twist yarn) x 3 65 tex f192 (air tex/bright yarn) x 1 3.5 METHOD OF DYEING Solution dye/yarn-package dye 3.6 FINISHING OPERATIONS Warping, weaving, backcoated, heat set
