1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 01 09 Activated M. Dumitrescu Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, SOREL PATTERN, FLAT WOVEN 25% MINIMUM WSS-M1H1134-A POST INDUSTRIAL CONTENT 1. SCOPE The material defined by t
2、his specification is a SOREL pattern, Jacquard, flat woven bodycloth of good quality and uniform composition. The fabric is backcoated. 2. APPLICATION This specification was released originally for material used as a seat fabric, insert application for 2010 CD338 Ford SEL 3. REQUIREMENTS In addition
3、 to the requirements listed herein, the fabric shall meet all requirements of: WSS-M8P18-A1/A4. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A) 3.2 FABRIC CONSTRUCTIO
4、N 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 255 ends/10 cm Fill 170 picks/10 cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) Face Fabric w/backcoat 360 g/m23.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4. Fabric 100% Polyester Backcoating Acrylic ENGINE
5、ERING MATERIAL SPECIFICATIONWSS-M1H1134-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 16.7 tex f48 (false twist sol dye polyester yarn) x 3 Fill 85 tex f192 (false twist 100% PI polyester yarn) x 1 85 tex f192 (false twist polyester yarn) x 1 3.5 METHOD OF DYEING Solution dye/yarn-package dye 3.6 FINISHING OPERATIONS Woven, backcoated, heat set
