1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 01 29 Activated M. Dumitrescu Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 1 of 2 FABRIC, VESPER PATTERN, KNIT WSS-M1H1140-A 1. SCOPE The material defined by this specification is a VESPER PATTERN, 4
2、bars, 28 Gauge, TRICOT knit, body cloth of good quality and uniform composition. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2010 CD334 Mercury Lux seat bolster. 3. REQUIREMENTS In addition, to the requirements listed herein, the fabric
3、shall meet all requirements of WSS-M8P18-A1/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tole
4、rance (ASTM D 3887) Wales 126 wales/10 cm Courses 252 courses/10 cm 3.2.2 Fabric Weight, range, g/m2 (FLTM BN 106-01) Laminated * Face w/no Backcoat 476 - 526 311 - 344 * 3 mm foam thickness 3.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4 Fabric 100% Polyester ENGINEERING MATE
5、RIAL SPECIFICATIONWSS-M1H1140-A Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Face (A) 11.1 tex( natural polyester) (B) 7.78 tex( natural polyester) Middle 7.78 tex (natural polyester) Back 11.1 tex (natural polyester) 3.5 METHOD OF DYEING Piece Dye 3.6 FINISHING OPERATIONS Wash, preset, dye, heatset, inspect
