1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 1 2015 10 26 N Status No future usage D. Murtonen, NA 2010 05 13 Activated M. Dumitrescu, NA Copyright 2015, Ford Global Technologies, LLC Page 1 of 2 FABRIC, DARK CARA PATTERN, KNIT WSS-M1H1141-A2 NOT TO BE USED FOR NEW DESIGN 1. SCOPE
2、The material defined by this specification is DARK CARA PATTERN, 4 bars, 28 Gauge, TRICOT knit, body cloth of good quality and uniform composition. The fabric is dark color printed for a special pattern. 2. APPLICATION This specification was released originally for material used as an interior trim
3、fabric for 2011 U502 seat insert. 3. REQUIREMENTS In addition, to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Re
4、quirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3887) Wales 133 wales/10 cm Courses 196 courses/10 cm 3.2.2 Fabric Weight, range, g/m2 (FLTM BN 106-01) Laminated * Face w/no Backcoat 456 - 504 370 - 335 * 3 mm foam thickness
5、3.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4 Fabric 100% Polyester ENGINEERING MATERIAL SPECIFICATION WSS-M1H1141-A2 Copyright 2015, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Face (A) 13.3 tex( natural polyester) (B) 7.78 tex( natural pol
6、yester) Middle 7.78 tex (natural polyester) Back 7.78 tex (natural polyester) 3.5 METHOD OF DYEING Piece Dye, Printed pattern 3.6 FINISHING OPERATIONS Wash, preset, dye, set, print, set, inspect 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase department will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
