1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2016 05 12 N Status No replacement named D. Murtonen. NA 2008 01 18 Activated V. Demarchi Copyright 2016, Ford Global Technologies, LLC Page 1 of 2 FABRIC, VIEDMA PATTERN, WOVEN JACQUARD WSS-M1H1144-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE Th
2、e material defined by this specification is a woven polyester fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for C307 - 2009 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requiremen
3、ts of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775)
4、 Warp 41.0 yarn/cm Fill 46.0 yarn/cm 3.2.2 Fabric Weight, +/- 10% tolerance 343 g/m (face fabric) (FLTM BN 106-01) Seat (laminated to 4 mm foam) 540 g/m (fabric+foam+back) 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester Foam - Seat PUR/Polyether 28kg/m Backing Fabric (Seats only) 100% PES 45g/m E
5、NGINEERING MATERIAL SPECIFICATION WSS-M1H1144-A Copyright 2016, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 330 dtex, f 68 , Semidull , Round, False twist Textured, Polyester Fill 250 dtex, f 72, Semi dull, Round, False twist Textured, Polyester 3.5 METHOD OF D
6、YEING Piece Dyed 3.6 FINISHING OPERATIONS Dye, heat-set, lamination 3.7 THICKNESS, mm, range (ASTM D 1777) Seat (laminated to 4 mm foam + backing fabric) 4.5 - 6.0mm 3.8 TRIMMABILITY PROPERTIES 3.8.1 Stretch, %, range (SAE J855) Seat Warp 7.0 18.0 Fill 6.0 16.0 3.9 FLAMMABILITY (ISO 3795/SAE J369) B
7、urn Rate, max 100 mm/minute 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.
