1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Ver. 2 2015 10 26 N Status No future usage D. Murtonen, NA 2008 09 18 Activated M. Dumitrescu, FNA Copyright 2015, Ford Global Technologies, LLC Page 1 of 2 FABRIC, CROSSROADS PATTERN, FLAT WOVEN WSS-M1H1148-A 25% POST INDUSTRIAL YARN CONTENT
2、 NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a Crossroads pattern, Jacquard, flat woven, bodycloth of good quality and uniform composition. The fabric is backcoated. 2. APPLICATION This specification was released originally for material used as a seat fabric,
3、 insert application for B299N 2011 (NA market). 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Req
4、uirements for Production Materials (WSS-M99P1111-A) 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 380 ends/10 cm Fill 185 picks/10 cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) Face Fabric w/backcoat 360 g/m2 3.3 COMPOSITION (ASTM D 629) Tolerance as spe
5、cified in WSS-M8P18-A1/A4. Fabric 100% Polyester Backcoating Acrylic ENGINEERING MATERIAL SPECIFICATION WSS-M1H1148-A Copyright 2015, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 25 tex f68 (false twist polyester) x 2 Fill 85 tex f192 (air texture 100% PI polyes
6、ter yarn) x 1 50 tex f132 (false twist polyester) x 1 3.5 METHOD OF DYEING Solution dye/yarn-package dye 3.6 FINISHING OPERATIONS Warping, weaving, backcoated, heat set 4 GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase department will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
