1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 0 2012 08 24 Revised Corrected 3.1.1 specification number 2012 08 23 Released M. Montgomery, FoE Controlled document at www.MATS Copyright 2012, Ford Global Technologies, LLC Page 1 of 2 FABRIC, MONAX PATTERN, DOBBY WOVEN WSS-M1H1150-A1
2、UNLAMINATED 1. SCOPE The material defined is a dobby woven polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for B299mca 2013.5 MY seat insert. The fabric was originally approved as trilaminated with foam and backing fabric/
3、scrim. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1.1 WSS-M1H1150-A1 is based on virgin materials. 3.1.2 In addition to the requirements liste
4、d herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/-10 % tolerance (ASTM D 3775) warp 145 / 10 cm weft 145/ 10 cm 3.2.2 Fabric Weight, +/-10 % tolerance 260 g/m2 (FLTM BN 106-01) 3.3 COMPOSITION (ASTM D 629) Fabric 1
5、00% polyester 3.4 YARN CONSTRUCTION* (ASTM D 1244) Warp 850dtexf408 (polyester,semi-dull,air texturized, round section) Weft 850dtex f408 (polyester, semi-dull, air texturized, round section) 3.5 METHOD OF DYEING Solution dyed or as approved by Materials Engineering, ENGINEERING MATERIAL SPECIFICATI
6、ON WSS-M1H1150-A1 Copyright 2012, Ford Global Technologies, LLC Page 2 of 2 3.6 FINISHED OPERATIONS Washing, Drying, Framing or As approved by Materials Engineering. 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this sp
7、ecification. Contact for questions concerning Engineering Material Specifications. 4.1 Purchase departments will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only. 4.2 If yarn is locally sourced it must meet the above fabric construction, composition and yarn construction. The fabric must also meet the requirements of WSS-M8P18-A1/A2/A3/A4. 4.3 Global strategy for this fabric is to use tri-laminate/foam & scrim construction in all regions
