1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 0 2014 06 11 Released M. Montgomery, FOE Controlled document at www.MATS Copyright 2014, Ford Global Technologies, LLC Page 1 of 2 FABRIC, UNICODE PATTERN, WARP KNIT, WSS-M1H1174-A1 LAMINATE EMBOSSED FABRIC 1. SCOPE The material defined
2、is a warp knit polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2014 MY European Fiesta seat insert. The fabric was originally approved as trilaminated with foam and scrim. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR
3、PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1.1 This specification is based on virgin materials. 3.1.2 In addition to the requirements listed herein, the fabric shall meet all requirements
4、of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, -10 /+ 10 % tolerance (ASTM D3775) Wales 110 / 10 cm Courses 240 / 10 cm 3.2.2 Fabric Weight, -10 + 10 % tolerance 265 g/m2 (FLTM BN 106-01) 3.3 COMPOSITION (ASTM D629) Fabric 100% polyester ENGINEERING MATERIAL SPEC
5、IFICATION WSS-M1H1174-A1 Copyright 2014, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION* (ASTM D1244) Face (A) 110 Dtex f 36, (polyester, false twist, texturized)Face (B) 110 Dtex f 36, (polyester, false twist, texturized) Back 110 Dtex f 36 (polyester , false twist, texturized)3.5
6、METHOD OF DYEING piece dyed 3.6 FINISHED OPERATIONS preset dye postset lame lamination roller embossing 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Mat
7、erial Specifications. 4.1 Purchase departments will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only. 4.2 If yarn is locally sourced it must meet the above fabric construction, composition and yarn construction. The fabric must also meet the requirements of WSS-M8P18-A1/A2/A3/A4. 4.3 Global strategy for this fabric is to use tri-laminate/foam & scrim construction in all regions.
