1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 0 2014 07 02 Released M. Montgomery, EU Controlled document at www.MATS Copyright 2014, Ford Global Technologies, LLC Page 1 of 2 FABRIC, COURTYARD, WARP KNIT, WSS-M1H1180-A1 UNLAMINATED 1. SCOPE The material defined is a warp knit polye
2、ster face fabric out of non recycled materials. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for C344 MCA 2015.75MY seat insert. The fabric was originally approved as trilaminated with foam and backing fabric/scrim. 3. REQUIREMENTS 3.1 STANDA
3、RD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1.1 This specification is based on virgin materials. 3.1.2 In addition to the requirements listed herein, the fabric shall me
4、et all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/-10% tolerance (ASTM D3775) Wales 120 / 10 cm Courses 250/ 10 cm 3.2.2 Fabric Weight, +/- 10 % tolerance 370 g/m2 (FLTM BN 106-01) 3.3 COMPOSITION (ASTM D629) Fabric 100% polyester 3.4 YARN CONS
5、TRUCTION (ASTM D1244) Face (A) 167 Dtex f34, (polyester, false twist,texturized) Back 167 Dtex f48, (polyester, false twist, texturized) ENGINEERING MATERIAL SPECIFICATION WSS-M1H1180-A1 Copyright 2014, Ford Global Technologies, LLC Page 2 of 2 Back 78 Dtex f24 (polyester , false twist, texturized)
6、3.5 METHOD OF DYEING Piece dyed 3.6 FINISHED OPERATIONS presetting, piece dye, Stentor 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specificati
7、ons. 4.1 Purchase departments will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only. 4.2 If yarn is locally sourced it must meet the above fabric construction, composition and yarn construction. The fabric must also meet the requirements of WSS-M8P18-A1/A2/A3/A4. Fabric must be approved by Design to the original master. 4.3 Global strategy for this fabric is to use tri-laminate/foam & scrim construction in all regions
