1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2009 05 28 Activated V. Demarchi, FSAO Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 1 of 2 FABRIC, NAZCA PATTERN, WOVEN JACQUARD WSS-M1H1205-A 1. SCOPE The material defined by this specification is a woven
2、 jacquard polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2011 BV256 Seat and Door Panel. 3. REQUIREMENTS In addition, to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4 as app
3、licable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3887) Warp 45.0 yarn/cm Fill 38.0 yarn/
4、cm 3.2.2 Fabric Weight, +/- 10%, g/m 315 (face fabric) (FLTM BN 106-01) Face w/no Back coat 283 347 Laminated* 393 507 * 2 mm foam thickness + backing fabric 3.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4 Fabric 100% Polyester Backing Fabric (Seats only) 100% Polyester ENGINE
5、ERING MATERIAL SPECIFICATIONWSS-M1H1205-A Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) War 2 x 167 dtex, f 34, Semi dull, Round, False Twist Textured, Polyester Fill 250 dtex, f 72 Semi dull, Round, False Twist Textured
6、 Polyester Fill 250 dtex, f 68 Semi dull, Round, False Twist Textured, Polyester 3.5 METHOD OF DYEING Piece Dyed 3.6 FINISHING OPERATIONS Dye, Heat-Setting, Lamination 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only
