1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 0 2016 05 16 N Status No replacement named D. Murtonen, NA 2009 03 12 Activated M. Dumitrescu Copyright 2016, Ford Global Technologies, LLC Page 1 of 2 FABRIC, WATCHLINK PATTERN, FLAT WOVEN WSS-M1H1207-A NOT TO BE USED FOR NEW DESIGN 1.
2、SCOPE The material defined by this specification is a Watchlink pattern, Dobby, flat woven bodycloth of good quality and uniform composition. The fabric is backcoated. 2. APPLICATION This specification was released originally for material used as a seat fabric, insert application for 2011 U387. 3. R
3、EQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of: WSS-M8P18-A1/A4. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A)
4、 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 330 ends/10 cm Fill 185 picks/10 cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) Face Fabric w/backcoat 377 g/m2 3.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4. Fabric 100% Polyester Ba
5、ckcoating Acrylic ENGINEERING MATERIAL SPECIFICATION WSS-M1H1207-A Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 65 tex (air texture polyester) x 1 Fill 85 tex (air texture 100% polyester yarn) x 1 25 tex f96 (false
6、 twist polyester) x 2 3.5 METHOD OF DYEING Solution dye/yarn-package dye 3.6 FINISHING OPERATIONS Warping, weaving, backcoated, heat set 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase department will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
