1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2010 09 27 Activated V. DemarchiPrinted copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 1 of 2 FABRIC, REDE HIDE PATTERN, WARP KNITTED WSS-M1H1208-A 1. SCOPE The material defined by this specification is a warp knitt
2、ed polyester fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2011 BV256 Seat. 3. REQUIREMENTS In addition, to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4 as applicable. 3.1 STANDARD REQUI
3、REMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3887) Warp 9.0 yarn/cm Fill 14.0 yarn/cm 3.2.2 Fabric Weight, +/-
4、10%, g/m 227 (face fabric) (FLTM BN 106-01) 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 150 dtex, f 48, Semi dull, Round, Flat, Polyester 3.5 METHOD OF DYEING Piece Dyed ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1208-A Printed copies are uncontrolled Co
5、pyright 2010, Ford Global Technologies, LLC Page 2 of 2 3.6 FINISHING OPERATIONS Heat-Setting, Dye, Heat Setting 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only
