1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions Rev. 0 2010 11 29 Activated M. Dumitrescu, NA Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 1 of 2 FABRIC, TECHTONIC PATTERN, KNIT WSS-M1H1219-A 1. SCOPE The material defined by this specification is a Tech
2、tonic, double needle bar knit, body cloth of good quality and uniform composition. 2. APPLICATION This specification was released originally for material used as a trim fabric for P415 Raptor 2012. 2.1 LIMITATIONS The Techtonic fabric to be used only for limited applications, such as decorative trim
3、 application. 3. REQUIREMENTS In addition, to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Produ
4、ction Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/-10% tolerance (ASTM D 3887) Wales 94 wales/10 cm Courses 134 courses/ 10 cm 3.2.2 Fabric Weight, +/- 10% tolerance 423 g/m2 (FLTM BN 106-01) 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester ENGINEERING MATERIAL SPECIF
5、ICATIONWSS-M1H1219-A Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Face 16.7 tex (text sol. dye polyester) x 1 16.7 tex (text sol. dye polyester) x 1 Middle 7.8 tex (text sol dye polyester) x1 3.3 tex Monofilament Back 1
6、1.1 tex (SDR polyester) x 1 11.1 tex (SDR polyester) x1 3.5 METHOD OF DYEING Solution dye and Piece Dye 3.6 FINISHING OPERATIONS Knit, Tenter, Dye, Tenter surface treatment, Inspect 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase department will ensure that the material defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
