1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2009 01 06 N-STATUS No Replacement B. Haggart, FNA 2003 03 28 Revised Para 3.0 inserted ; Para 3.1, 3.2, 3.3, 3.9, 3.10, 4 deleted 1998 09 15 Activated L. Daniv-ZarewychPrinted copies are uncontrolled Page 1
2、 of 2 Copyright 2009, Ford Global Technologies, Inc. FABRIC, FERRIS II PATTERN, KNIT WS-M1H68-B NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a Ferris II pattern, plush knit bodycloth of good quality and uniform composition. 2. APPLICATION This specification wa
3、s released originally for material used as an interior trim fabric for 1999 Taurus program. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part produce
4、rs must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5 % tolerance (ASTM D387) Wales 13.8 wales/cm Course 24. course/cm 3.4.2 Fabric Weight, range 294 - 325 g/m2(FLTM BN 106-01) 3.5 COMPOSITION (ASTM D 629) T
5、olerance as specified in WSS-M8P18-A1/A4. Fabric 100 % polyester ENGINEERING MATERIAL SPECIFICATION WSS-M1H686-B Page 2 of 2 Copyright 2009, Ford Global Technologies, Inc. 3.6 YARN CONSTRUCTION (ASTM D 1244) Face (A) 7.7 tex f24 (polyester, dull, trilobal) (B) 7.7 tex f24 (polyester, bright, round)
6、Middle 7.7 tex f24 (polyester, semi-dul, rund) Back 7.7 tex f24 (polyster,semi-dul, rund) 3.7 METHOD OF DYEING Piece dyed, printed 3.8 FINISHING OPERATIONS Dye, dry, nap, shear, heatset, shear, print, steam, wash, extract, tiger, heatset, and inspect 3.9 STRETCH & SET, %, range (SAE J855) Fabrics ou
7、tside this range may be accepted provided they have been approved jointly by the Materials Engineering activity and the affected Design Engineering and Development activity. Wales Course Stretch, range 6 - 30 10 - 35 Set, max* 12 14 *At no time shall the set exceed 40 % of the measured stretch unless approved jointly by the Materials Engineering activity and the affected Design Engineering and Development activity.
