1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2009 01 06 N-STATUS No Replacement B. Haggart, FNA 2003 03 18 Revised Para 3.0 inserted ; Para 3.1, 3.2, 3.3, 3.9, 4 deleted 1998 11 05 Activated L. Daniv-Zarewych Printed copies are uncontrolled Page 1 of 2
2、 Copyright 2009, Ford Global Technologies, Inc. FABRIC, AMAY PATTERN, WOVEN WSS-M1H703-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a polyester pattern flat woven of good quality and uniform composition. 2. APPLICATION This specification was released origina
3、lly for material used as an interior trim fabric for Mazda Ranger. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of: WSS-M8P18-A1/A4. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the C
4、ompanys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 FABRIC CONSTRUCTION 3.4.1 Fabric Count, +/- 5 % tolerance (ASTM D 3775) Warp 74.8 warp/10 cm Fill 98.4 fill/10 cm 3.4.2 Fabric Weight, range 526 - 559 g/m2(FLTM BN 106-01) 3.5 COMPOSITION (ASTM D 629) Tolerance as specified
5、 in WSS-M8P18-A1/A4 Fabric 100 % Polyester Backcoating None ENGINEERING MATERIAL SPECIFICATION WSS-M1H703-A Page 2 of 2 Copyright 2009, Ford Global Technologies, Inc. 3.6 YARN CONSTRUCTION (ASTM D 1244) Warp Pile 184 tex air textured f 136 (100 % semi-dull, polyester) Fill 184 tex air textured f 136 (semi-dul, polyster)3.7 METHOD OF DYEING Package Dye 3.8 FINISHING OPERATIONS Heatset, Coat, Inspct
